Engineering superior toughness in commercially viable block copolymer modified epoxy resin
- 16 September 2015
- journal article
- research article
- Published by Wiley in Journal of Polymer Science Part B: Polymer Physics
- Vol. 54 (2) , 189-204
Abstract
The microstructure and mechanical properties of a block copolymer modified commercial thermoset plastic formed from a bisphenol‐A based epoxy and a bio‐derived amine hardener (Cardolite®NC‐541LV) were investigated. A series of poly(ethylene oxide)‐b‐poly(butylene oxide) (PEO‐PBO) diblock copolymers was synthesized at fixed composition (31 ± 1% by volume PEO) and varying molecular weight expanding on a commercially available PEO‐PBO compound marketed by the Dow Chemical Company under the trade name FORTEGRA™ 100; direct application of any of these block copolymers resulted in little improvement of the poor fracture toughness of the cured material. Modification of the resin formulation and curing protocol led to the development of well‐defined spherical and branched worm‐like micelles containing a PBO core and PEO corona in the cross‐linked products as evidenced by transmission electron microscopy (TEM) and small angle X‐ray scattering (SAXS) measurements. Maximum fracture toughness (K1c) and a ninefold increase in the critical strain energy release rate (G1c) over the unmodified neat epoxy was achieved at 5 wt % loading of intermediate molecular weight PEO‐PBO, without measureable reductions in modulus, glass transition temperature or transparency. This study provides new strategies for engineering improved performance in thermoset materials using block copolymer additives that exhibit challenging mixing thermodynamic characteristics with the component monomers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 189–204Keywords
Funding Information
- National Science Foundation (Award Number DMR-1420013)
- Dow Chemical Company
This publication has 63 references indexed in Scilit:
- Exploring Microphase Separation Behavior of Epoxidized Poly(styrene-b-isoprene-b-styrene) Block Copolymer Inside Thin Epoxy CoatingsMacromolecules, 2013
- Reaction-Induced Microphase Separation in Epoxy Thermosets Containing Block Copolymers Composed of Polystyrene and Poly(ε-caprolactone): Influence of Copolymer Architectures on Formation of NanophasesMacromolecules, 2012
- Strain rate effect on toughening of nano-sized PEP–PEO block copolymer modified epoxyActa Materialia, 2009
- Epoxies toughened with triblock copolymersJournal of Polymer Science Part B: Polymer Physics, 2007
- Structural effect of phenalkamines on adhesive viscoelastic and thermal properties of epoxy networksJournal of Applied Polymer Science, 2006
- Block copolymers in tomorrow's plasticsNature Materials, 2005
- Epoxy Resins2004
- A new class of epoxy thermosetsMacromolecular Symposia, 2003
- Block copolymer modified novolac epoxy resinJournal of Polymer Science Part B: Polymer Physics, 2003
- Elastomer-Modified Epoxy Resins in Coatings Applications1983