Abstract
In this study, a novel single-fed low-profile circularly polarized (CP) antenna with a bandpass filtering response is proposed. It is based on a planar substrate integrated waveguide (SIW) dual-mode (TE102/TE201) cavity. When the vias on the edge become sparse, the electromagnetic wave leaks out while maintaining a good dual-mode filtering response. The antenna is folded in order to reduce the aperture size to form an un-splitted radiation beam with small side lobes. Owing to a rotated dual-mode operation, the fields escaping from four sets of sparse vias are approximately of equal amplitude with a progressive phase difference of 90 degrees in sequence. CP radiation is thus achieved when the four orthogonal half-mode radiation patches are excited by the leaking field. By adopting a single feeding with two pairs of asymmetrical shorting pins, the peak gain is improved significantly and a 3-dB axial ratio (AR) response with two minima is obtained simultaneously. Long metal walls and rectangular slots are introduced to fold the current flow and change the wave direction. Consequently, side-lobe level is significantly reduced and the antenna directivity is enhanced. To verify this novel design idea, an antenna prototype with a height of 0.036 λ0 has been fabricated using the multi-layer PCB process and measured in a near-field microwave chamber. Measured results are well consistent with the simulation, demonstrating CP radiation with a flat/high gain and good filtering performance.

This publication has 34 references indexed in Scilit: