Abstract
This study presents an evaluation of cement-millet husk ash (CMHA) concrete for sustainable rigid pavement applications using destructive and non-destructive testing techniques. Millet husk ash (MHA), obtained from controlled burning of agricultural waste, was used to replace ordinary Portland cement (OPC) at 0-20% (at 5% increment) by weight in two nominal mix proportions of 1:2:4 and 1:1.5:3. Fresh concrete properties were examined through slump and setting time tests, while hardened performance was assessed using compressive strength testing at 3, 7, 14, and 28 days. Complementary non-destructive tests, including rebound hammer and ultrasonic pulse velocity (UPV), were employed to characterize surface hardness, internal concrete quality, and microstructural integrity. Results showed that MHA replacement between 5 -10% improved workability, densification, and strength development due to enhanced pozzolanic activity and matrix refinement. This improvement was consistently reflected in both destructive and non-destructive indicators. However, higher replacement levels resulted in reduced performance, attributed to excessive dilution of cementitious compounds. The findings showed that MHA is a viable supplementary cementitious material for rigid pavement concrete and supports sustainable construction through reduced cement consumption and effective waste utilization and an optimal replacement range of 5-10% is recommended for structural pavement applications.