Effect of heat treatment temperature on the phase composition, mechanical properties and corrosion resistance of wire arc additive manufactured duplex stainless steel
Authors:
- 30 September 2025
- journal article
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 32 (1) , 162-179
Abstract
Purpose: This study aims to investigate the influence of heat treatment on the microstructure and mechanical properties of wire arc additively manufactured (WAAM) duplex stainless steel (DSS). Design/methodology/approach: Gas metal arc welding based WAAM process was used for the fabrication of DSS wall structure using ER2209 filler wire. The as-fabricated WAAM part is predominantly austenitic (exceeding 80%), suggesting that heat treatment is necessary to attain a balanced phase fraction. The DSS samples were fabricated using WAAM process with ER2209 filler wire and subjected to heat treatment at various temperatures of 1250 °C, 1263 °C, and 1275 °C for 1 h followed by rapid water quenching. Electron backscattered diffraction analysis was used to evaluate the microstructure evolution during WAAM process and heat treatment process. Tensile test and Vickers microhardness analysis were conducted to determine the mechanical properties. Findings: Heat-treatment at 1250 °C shows a balanced phase fraction (1:1) and improved corrosion resistance (1.541 mpy) than the as-fabricated and other heat-treated samples. Also, the tensile strength of all heat-treated samples was comparatively higher than the as-fabricated WAAM sample. Research limitations/implications: This study mainly focused on demonstrating post-heat treatment conditions experimentally to enhance the strength and reliability of WAAM-fabricated DSS, benefiting applications in marine, offshore, chemical, and structural industries. Improved strength supports sustainability and lowers lifecycle costs. Originality/value: This study provides a critical analysis of the effects of heat treatment temperature on phase composition, mechanical performance, and corrosion behavior in WAAM-fabricated DSS. These observations highlight the prospects of post-heat treatment in improving the structural integrity and performance of WAAM-fabricated DSS parts.Keywords
This publication has 45 references indexed in Scilit:
- An Overview on Additive Manufacturing of Duplex Stainless Steels: Microstructure, Mechanical Properties, Corrosion Resistance, Postheat Treatment, and Future PerspectivesSteel Research International, 2024
- Microstructural Evolution, Mechanical and Electrochemical Performance of Duplex Stainless Steel Fabricated by Wire Arc Additive Manufacturing with ER2209 Filler WireSteel Research International, 2024
- Fundamentals of Corrosion2024
- Microstructure, Mechanical Properties and Fracture Toughness of SS 321 Stainless Steel Manufactured Using Wire Arc Additive ManufacturingTransactions of the Indian Institute of Metals, 2022
- Heat-affected zone ferrite content control of a duplex stainless steel grade to enhance weldabilityWelding in the World, 2022
- Wire laser metal deposition of 22% Cr duplex stainless steel: as-deposited and heat-treated microstructure and mechanical propertiesJournal of Materials Science, 2022
- Studies on Super Duplex Stainless Steel Manufactured by Wire Arc Additive ManufacturingTransactions of the Indian Institute of Metals, 2021
- Hot Ductility Characterization of Sanicro-28 Super-Austenitic Stainless SteelMetallurgical and Materials Transactions A, 2016
- Electrochemical Impedance Spectroscopy (EIS) Applications to Sensors and Diagnostics2014
- Using JMatPro to model materials properties and behaviorJOM, 2003