A case study of hybrid manufacturing of a Ti-6Al-4V titanium alloy hip prosthesis
Authors:
- António José FestasAFAntónio José Festas
- Daniel Amaral FigueiredoDFDaniel Amaral Figueiredo
- Sílvia Ribeiro CarvalhoSCSílvia Ribeiro Carvalho
- Thang Hoang VoTVThang Hoang Vo
- Pierre-Thomas DoutrePDPierre-Thomas Doutre
- François VilleneuveFVFrançois Villeneuve
- António Manuel RamosAntónio Manuel Ramos
- João Paulo DavimJoão Paulo Davim
Open Access
- 9 November 2023
- journal article
- research article
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 129 (9-10) , 4617-4630
Abstract
Hybrid manufacturing (HM) is a process that combines additive manufacturing (AM) and subtractive manufacturing (SM). It is becoming increasingly recognized as a solution capable of producing components of high geometric complexity, while at the same time ensuring the quality of the surface finish, rigour and geometric tolerance on functional surfaces. This work aims to study the surface finish quality of an orthopaedic hip resurfacing prosthesis obtained by HM. For this purpose, test samples of titanium alloy Ti-6Al-4V using two Power Bed Fusion (PBF) processes were manufactured, which were finished by turning and 5-axis milling. It was verified that, upon the machining tests, no differences in Ra and Rt were found between the various types of AM. Regarding the type of SM used, 5-axis milling provided lower roughness results with a consistent value of Ra = 0.6 µm. The use of segmented circle mills in 5-axis milling proved to be an asset in achieving a good surface finish. This work successfully validated the concept of HM to produce a medical device, namely, an orthopaedic hip prosthesis.As far as surface quality is concerned, it could be concluded that the optimal solution for this case study is 5-axis milling.Keywords
Funding Information
- Universidade de Aveiro
This publication has 31 references indexed in Scilit:
- Additive manufacturing of medical instruments: A state-of-the-art reviewAdditive Manufacturing, 2019
- Additive, Subtractive, and Hybrid Manufacturing Processes2018
- Machining of biocompatible materials: a reviewThe International Journal of Advanced Manufacturing Technology, 2018
- Geometric Complexity Based Process Selection for Hybrid ManufacturingProcedia Manufacturing, 2017
- Hybrid Ants: A New Approach for Geometry Creation for Additive and Hybrid ManufacturingProcedia CIRP, 2017
- Optimization of surface roughness in ball-end milling using teaching-learning-based optimization and response surface methodologyProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016
- Machining of Titanium Alloy(Ti-6Al-4V)—Theory to ApplicationMachining Science and Technology, 2015
- Hybrid processes in manufacturingCIRP Annals, 2014
- Problems and solutions in machining of titanium alloysThe International Journal of Advanced Manufacturing Technology, 2013
- The Development of the Durom™ Metal-On-Metal Hip ResurfacingHIP International, 2006