Hydrogen Detection with SAW Polymer/Quantum Dots Sensitive Films
Open Access
Abstract
Regarding the use of hydrogen as a fuel, it is necessary to measure its concentration in air at room temperature. In this paper, sensitive composite films have been developed for surface acoustic wave (SAW) sensors, using quantum dots (QDs) and polymers. Si/SiO2 QDs were used due to having a high specific surface area, which considerably improves the sensitivity of the sensors compared to those that only have a polymer. Si/SiO2 QDs were obtained by laser ablation and analyzed by X-ray diffraction and transmission electron microscopy (TEM). Two types of polymers were used: polydimethylsiloxane (PDMS) and polymethylmethacrylate (PMMA). Polymer and polymer with QDs compositions were deposited on the sensor substrate by drop casting. A heat treatment was performed on the films at 80 °C with a thermal dwell of two hours. The sensors obtained were tested at different hydrogen concentrations at room temperature. A limit of detection (LOD) of 452 ppm was obtained by the sensor with PDMS and Si/SiO2 QDs, which was heat treated. The results demonstrated the potential of using QDs to improve the sensitivity of the SAW sensors and to achieve a heat treatment that increases its adsorption capacity of the gas molecules.Keywords
Funding Information
- Ministerul Educatiei si Cercetarii Stiintifice (PN-III-P1-1.2-PCCDI-2017-0172/15PCCDI and NUCLEU 16N / 08.02.2019)
This publication has 30 references indexed in Scilit:
- Surface Acoustic Wave Sensors for Hydrogen and Deuterium DetectionSensors, 2017
- The investigation of hydrogen gas sensing properties of SAW gas sensor based on palladium surface modified SnO 2 thin filmMaterials Science in Semiconductor Processing, 2017
- Synthesis of Nanoparticles by Laser Ablation: A ReviewKONA Powder and Particle Journal, 2017
- Reliability and selectivity of H2 sensors composed of Pd Film nanogaps on an elastomeric substrateSensors and Actuators B: Chemical, 2016
- Laser-grown ZnO nanowires for room-temperature SAW-sensor applicationsSensors and Actuators B: Chemical, 2015
- New sensitive layers for surface acoustic wave gas sensors based on polymer and carbon nanotube compositesSensors and Actuators B: Chemical, 2012
- Bi-layer nanostructures of CuPc and Pd for resistance-type and SAW-type hydrogen gas sensorsSensors and Actuators B: Chemical, 2012
- Hg(II) sensing based on functionalized carbon dots obtained by direct laser ablationSensors and Actuators B: Chemical, 2010
- Polypyrrole nanofiber surface acoustic wave gas sensorsSensors and Actuators B: Chemical, 2008
- Rheological Properties of Poly(dimethylsiloxane)Industrial & Engineering Chemistry Research, 1998