Effect of Mix Parameters on the Dynamic Mechanical Properties of Cement Asphalt Mortar
- 1 August 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 29 (8)
Abstract
In this paper, the effects of key mix parameters, including asphalt–cement ratio (A/C), water–cement ratio (W/C), and sand–cement ratio (S/C), on the dynamic mechanical properties of the cement asphalt (CA) mortar used in the ballastless slab track of high-speed rail were investigated by dynamic mechanical thermal analysis (DMTA). Results showed that storage modulus ( ) increased with increased S/C ratio and decreased A/C and W/C ratios. The damping ability of CA mortar, which is characterized by , increased with increased A/C and W/C ratios. In comparison with Type-II CA mortar which has a lower A/C ratio, of Type-I CA mortar with a higher A/C ratio presented a different dependency on the S/C ratio. Relationships between dynamic mechanical properties ( and ) and volume fraction of phases in CA mortar were quantitatively established.
Keywords
This publication has 12 references indexed in Scilit:
- Slab track: Review of existing systems and optimization potentials including very high speedConstruction and Building Materials, 2015
- Damping in composite materials: Properties and modelsComposites Part B: Engineering, 2015
- 9-12Cr Heat-Resistant Steels2015
- Young's modulus of isotropic porous materials with spheroidal poresJournal of the European Ceramic Society, 2014
- Effect of porosity on the damping properties of modified epoxy composites filled with fly ashScripta Materialia, 2007
- Characterization of cement paste by dynamic mechanical thermo-analysisMaterials Characterization, 2006
- Double inclusion model for approximate elastic moduli of concrete materialCement and Concrete Research, 1996
- Dynamic mechanical analysis studies of the interphasePolymer Composites, 1987
- Internal friction in polymer‐impregnated hardened cement pasteJournal of Applied Polymer Science, 1976
- Dynamic mechanical response of polymer‐impregnated mortarsPolymer Engineering & Science, 1975