Numerical Simulation and Experimental Study on the Drilling Process of 7075-t6 Aerospace Aluminum Alloy
Open Access
Abstract
A finite element model for setting drilling conditions is established. The effect of feed speed and spindle speed on the drilling process was studied. In the test phase, drilling tests were conducted using three different feed speeds (60, 100, and 140 mm/min) and three different spindle speeds (800, 1000, and 1200 rpm). The correctness of the finite element model was verified by comparing the experimental and numerical simulation data. The results show that the axial force and torque increase significantly with the increase of feed speed, while the axial force and torque increase less as the spindle speed increases. The numerical simulation results show that the temperature of the cutting edge increases as the feed speed increases. Increasing the rotating speed increases the formation of chip curl. When the working conditions are high rotating speed and low feed, the tool wear is reduced, and the machining quality is better. The numerical simulation results obtained for the chip forming effect are similar to the experimental data. In addition, the simulation results show the generation of burrs. A comparison of the finite element simulation and experimental data leads to an in-depth understanding of the drilling process and ability to optimize subsequent drilling parameters, which provide reliable process parameters and technical guarantees for the successful implementation of drilling technology for space suspended ball structures.Keywords
Funding Information
- National Natural Science Foundation of China (No.51975567, No.51505470)
- Liaoning Revitalization Talents Program (XLYC1907152)
- Natural Science Foundation of Liaoning Province (2019-MS-347)
- State Key Laboratory of Robotics (Y7C1207)
- Youth Innovation Promotion Association of the Chinese Academy of Sciences (No.2018237)
- Jiang Xin-song Innovation Fund (No.20180504)
This publication has 29 references indexed in Scilit:
- Performance analysis of rotary blast-hole drills through machine vibration and coarseness index mapping – A novel approachMeasurement, 2020
- Experimental measurement on friction performance of PDC bearings for oil drilling under different working conditionsMeasurement, 2020
- Measurement and evaluation of hole attributes for drilling CFRP composites using an indigenously developed cryogenic machining facilityMeasurement, 2020
- FEM Simulation of Tool Wear in DrillingProcedia CIRP, 2017
- Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4VJournal of Materials Processing Technology, 2016
- 3D finite element modelling of drilling process of Al7075-T6 alloy and experimental validationJournal of Mechanical Science and Technology, 2016
- Simulation and optimization of machining parameters in drilling of titanium alloysSimulation Modelling Practice and Theory, 2016
- Study on the predicted model and experiment of drilling forces in drilling Ti6Al4VJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2015
- Cutting Simulation of Titanium Alloy Drilling with Energy Analysis and FEMProcedia CIRP, 2015
- Effect of machining parameters and coating on wear mechanisms in dry drilling of aluminium alloysInternational Journal of Machine Tools and Manufacture, 2005