Pressureless Sintering and Reaction Mechanisms of Ti 3 SiC 2 Ceramics
- 2 April 2014
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 97 (5) , 1407-1412
Abstract
Easy sinterable Ti 3 SiC 2 powder was synthesized from a powder mixture with a molar ratio of 1.0 Ti , 0.3 Al , 1.2 Si , and 2.0 TiC by heating at 1200°C in the flowing Ar. Here, the Al powder acts as a deoxidation agent and provides a liquid phase for the reaction. The powder compacts subjected to pressureless sintering at 1300°C in Ar had a relative density up to 99%. The results of chemical analysis and the measured lattice constant suggest that the Al–Si liquid phase was formed at approximately 1200°C and that liquid‐phase sintering was promoted by the 0.1 molar ratio of Al and the 0.2 molar ratio of Si remaining in excess. The three‐point bending strength, fracture toughness, and electrical resistivity of the sintered samples were 380 MP a, 4.1 MP a m 1/2 , and 0.34μΩm, respectively.Keywords
Funding Information
- Japan Society for the Promotion of Science (23350104)
This publication has 32 references indexed in Scilit:
- Physical and mechanical properties of highly textured polycrystalline Nb4AlC3ceramicScience and Technology of Advanced Materials, 2011
- Fabrication of Textured Nb 4 AlC 3 Ceramic by Slip Casting in a Strong Magnetic Field and Spark Plasma SinteringJournal of the American Ceramic Society, 2010
- Pressureless sintering and mechanical properties of titanium aluminum carbideMaterials Letters, 2008
- Electrical resistivity of titanium in the temperature range from 290 to 1800 KHigh Temperature, 2007
- Synthesis of Ti3Si0.8Al0.4C1.8 solid solution from Ti–Si–Al–C powder mixtureMaterials Letters, 2007
- Effect of Al addition on pressureless reactive sintering of Ti3SiC2Scripta Materialia, 2006
- Tape Casting, Pressureless Sintering, and Grain Growth in Ti 3 SiC 2 CompactsJournal of the American Ceramic Society, 2004
- Corrosion Behavior and Passive Film Characteristics Formed on Ti, Ti[sub 3]SiC[sub 2], and Ti[sub 4]AlN[sub 3] in H[sub 2]SO[sub 4] and HClJournal of the Electrochemical Society, 2004
- First-principles study of equilibrium properties and electronic structure of Ti3Si0.75Al0.25C2solid solutionJournal of Physics: Condensed Matter, 2003
- Ultra-low friction for a layered carbide-derived ceramic, , investigated by lateral force microscopy (LFM)Journal of Physics D: Applied Physics, 1999