A Novel Tool Condition Monitoring Technique of Determining Insert Flank Wear Width of Indexable Face Milling Tools Using On-Machine Laser Tool Setters
Open Access
- 15 October 2025
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 16 (10) , 1169
Abstract
Indexable face milling tools are often used to machine workpieces with large axial and radial depth of cuts, and thus, the inserts quickly wear out in machining. A kernel technique of smart machining is tool wear compensation, which is to regularly and automatically measure the insert radius/length with a laser tool setter on the machine table during machining, and compensate them in the subsequent machining. Another technique is tool condition monitoring, which is to calculate the insert flank wear width for tool condition and compare with its threshold. When it is less than but close to its threshold of invalid inserts, the cutting tool is automatically changed right before it becomes invalid. On-machine laser tool setters have been equipped in CNC machine tools for several years; however, they cannot conduct cutting tool condition monitoring. The main reason is that the insert flank wear width cannot be measured on the on-machine laser tool setter, and the status quo is that the cutting tool is replaced either too early or too late. To address this problem, a novel tool condition monitoring technique of determining the insert flank wear width of indexable face milling tool using on-machine laser tool setters is proposed. According to the insert geometry, the worn cutting edge and a new workpiece milling mechanism proposed in this work, the insert flank wear width can be calculated. In machining, the insert radius wear is measured on the on-machine laser tool setter, and the insert flank wear width is calculated to evaluate whether it is invalid soon. The results indicate that the optimal height for radius measurement is located near the intersection of the corner and side edges point MR3, and close to the cutting depth point MR5. A wear land width threshold of 0.10 mm is established to define tool failure. The proposed calculation method achieves high accuracy, maintaining calculation errors within 14.00%. The inserts can be used in good condition with the maximum lifespan. This method has been verified in machining applications and can be directly applied in industry.Keywords
All Related Versions
This publication has 43 references indexed in Scilit:
- A systematic multi-layer cognitive model for intelligent machine toolJournal of Intelligent Manufacturing, 2024
- Non-uniform flank wear prediction and tool orientation optimization for ball-end tool 5-axis machining based on real cutting length calculationThe International Journal of Advanced Manufacturing Technology, 2024
- A methodology for laser tool setters calibration and its precise mathematical modelChinese Journal of Aeronautics, 2024
- Precise measurement of geometric and physical quantities in cutting tools inspection and condition monitoring: A reviewChinese Journal of Aeronautics, 2023
- Online tool wear monitoring by super-resolution based machine visionComputers in Industry, 2022
- Tool wear monitoring through online measured cutting force and cutting temperature during face milling Inconel 718The International Journal of Advanced Manufacturing Technology, 2022
- Machine monitoring system: a decade in reviewThe International Journal of Advanced Manufacturing Technology, 2020
- Prediction of PCBN tool life in hard turning process based on the three-dimensional tool wear parameterThe International Journal of Advanced Manufacturing Technology, 2019
- Influence of feed rate and spindle speed on referencing laser tool-settersJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2014
- Evaluation of the performance of coated carbide tools in face milling TC6 alloy under dry conditionThe International Journal of Advanced Manufacturing Technology, 2012