Single-/Dual-Band Bandpass Filter-Integrated Single-Pole Double-Throw Switch Using Distributed Coupling Tri-Mode Resonators
Authors:
- 17 December 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 68 (2) , 741-749
Abstract
This article presents a method to design a single-band (SB)/dual-band (DB) bandpass filter (BPF)-integrated single-pole double-throw (SPDT) switch by using one/two distributed coupling identical tri-mode resonator (TMR) pairs loaded with opposite polarity p-i-n diodes. Moreover, the proposed method is also directly suitable for designing the multiple-band (MB) BPF-integrated SPDT switch by simply increasing the used numbers of identical TMR pairs. As an example, a SB-BPF-integrated SPDT switch with the central frequency (CF) of 1 GHz and the ripple bandwidth (RBW) of 65 MHz is first designed by using one identical switchable TMR pair, so as to validate our design approach. Due to the inherent property of TMR and the introduced source-load coupling, high ON-state passband selectivity is achieved. Then, two switched 50-Ω matching circuits are connected to two noncommon feeding lines, and an SB-BPF-integrated SPDT switch with absorptive OFF-state property is also realized. Finally, a DB-BPF-integrated SPDT switch with CFs of 0.9 GHz/1.8 GHz and RBWs of 50 MHz/105 MHz is designed by simply employing two identical TMR pairs. When the operating states of two identical switchable TMR pairs are specifically chosen, the proposed DB-BPF-integrated SPDT switch exhibits multiple functions, i.e., the 900/1800 SB-BPF-integrated SPDT switches with absorptive OFF-state property, the 900/1800 DB-BPF-integrated SPDT switch with absorptive OFF-state property, and the 900/1800 diplexer-integrated SPDT switch. The measured results also show that these switches exhibit low ON-state passband losses, deep out-of-band rejections (OBRs) of ON-state passbands, high OFF-state suppressions (OSSs), high port-to-port isolations (PPIs), and compact circuit sizes.Keywords
Funding Information
- National Natural Science Foundation of China (61401358)
- Fundamental Research Funds for the Central Universities (3102019PB003)
- State Key Laboratory of Millimeter Waves (K202030)
- Northwestern Polytechnical University (ZZ2019019)
This publication has 19 references indexed in Scilit:
- Four-Way Microstrip Lumped-Element Reconfigurable Dual-Mode Filtering Power DividerIEEE Transactions on Industrial Electronics, 2017
- Quasi-Lumped-Element Filter-Integrated Single-Pole Double-Throw SwitchIEEE Transactions on Microwave Theory and Techniques, 2017
- High-Power Filtering Switch With Low Loss and High Isolation Based on Dielectric ResonatorIEEE Transactions on Microwave Theory and Techniques, 2017
- Compact Switchable Bandpass Filter and Its Application to Switchable Diplexer DesignIEEE Microwave and Wireless Components Letters, 2015
- Microstrip bandpass single‐pole quadruple‐throw switch and independently switchable quadruplexerIET Microwaves, Antennas & Propagation, 2014
- Compact and switchable dual‐band bandpass filter with high selectivity and wide stopbandElectronics Letters, 2013
- Design of a Compact Microstrip Quint-Band Filter Based on the Tri-Mode Stub-Loaded Stepped-Impedance ResonatorsIEEE Microwave and Wireless Components Letters, 2012
- Microstrip Realization of Generalized Chebyshev Filters With Box-Like Coupling SchemesIEEE Transactions on Microwave Theory and Techniques, 2007
- Electronically Switchable Bandpass Filters Using Loaded Stepped-Impedance ResonatorsIEEE Transactions on Microwave Theory and Techniques, 2006
- Advanced coupling matrix synthesis techniques for microwave filtersIEEE Transactions on Microwave Theory and Techniques, 2003