Analytical Approach for Cogging Torque Reduction in Flux-Switching Permanent Magnet Machines Based on Magnetomotive Force-Permeance Model
- 14 August 2017
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 65 (3) , 1965-1979
Abstract
Flux-switching permanent magnet machine typically suffers from relatively high cogging torque due to its special doubly salient structure and high air-gap flux density, causing undesired torque ripples, as well as acoustic noise and vibration, especially at low speeds. In this paper, an analytical expression of cogging torque is derived based on a magnetomotive force-permeance model, through which the optimal design parameters and dimensions, such as combinations of stator slots and rotor poles, skewing angle, stator tooth width, rotor tooth width, and magnet thickness, can be determined. Based on the derived analytical model, two novel approaches for cogging torque reduction are proposed, i.e., asymmetric magnetomotive force and asymmetric permeance, respectively, and consequently, the optimal designs are also acquired analytically. However, it is also found that the optimal choice of the proposed techniques depends on the combinations of stator slots and rotor poles of the machines. Finally, the effectiveness of the proposed approaches is verified by both finite element analytical predictions and experimental results.Keywords
Funding Information
- 973 Program of China (2013CB035603)
- Fundamental Research Funds for Central Universities (2242016K41004)
This publication has 31 references indexed in Scilit:
- Slot opening optimization of surface mounted permanent magnet motor for cogging torque reductionEnergy Conversion and Management, 2012
- Cogging torque optimization in surface-mounted permanent-magnet motors by using design of experimentEnergy Conversion and Management, 2011
- Cogging torque suppression in a permanent-magnet flux-switching integrated-starter-generatorIET Electric Power Applications, 2010
- Reducing the Cogging Torque in Brushless DC Motors by Using Conformal MappingsIEEE Transactions on Magnetics, 2004
- High Accuracy Torque Calculation for a Rotating Machine Using Adaptive MeshingIEEE Transactions on Magnetics, 2004
- Reduction of cogging torque in interior-magnet brushless machinesIEEE Transactions on Magnetics, 2003
- Cogging torque due to roundness errors of the inner stator core surfaceIEEE Transactions on Magnetics, 2003
- Optimal shape design of iron core to reduce cogging torque of IPM motorIEEE Transactions on Magnetics, 2003
- Various design techniques to reduce cogging torque by controlling energy variation in permanent magnet motorsIEEE Transactions on Magnetics, 2001
- Pulsating torque minimization techniques for permanent magnet AC motor drives-a reviewIEEE Transactions on Industrial Electronics, 1996