Theoretical analysis of drilling cuttings considering stress zoning of surrounding rock and its application in stress detection
Open Access
- 25 February 2023
- journal article
- research article
- Published by Wiley in Energy Science & Engineering
- Vol. 11 (5) , 1662-1670
Abstract
Drilling cuttings method is a commonly used method to detect the risk of rockburst, which has been widely recognized and applied in coal mines. However, in the current theoretical research on the relationship between drilling cuttings method and coal stress, it is generally considered that the mechanical parameters of coal at different positions of roadway are unchanged, and the influence of surrounding rock plastic zone and elastic zone is not considered. Therefore, according to the secondary distribution characteristics of roadway side stress, the theoretical calculation formula of drilling cuttings in the plastic zone and elastic zone of the roadway side is established in this paper. The example shows that the distribution of cuttings on the roadway side is obviously consistent with the abutment pressure. The cuttings in the plastic zone and the elastic zone are in linear and power function with the coal stress, respectively, and the cuttings in the plastic zone are greater than those in the elastic zone. With the increase of the hole diameter, the slope of the relationship curve between the drill‐cutting weight and stress gradually increases, and the response of the drill‐cutting weight with a large hole diameter to the change of coal stress is more obvious. The numerical simulation results show that the error of the theoretical calculation formula of the drilling cuttings method is less than 9%, which can meet the engineering application needs of estimating the drill‐cutting weight in coal and the stress of coal. Using the theoretical formula, the stress field in the leading area of the working face is measured, and the leading influence range and the accurate position of the high stress concentration area are determined, which provides more comprehensive stress information for the early warning of impact danger and pressure relief.Keywords
This publication has 15 references indexed in Scilit:
- Effective evaluation of pressure relief drilling for reducing rock bursts and its application in underground coal minesInternational Journal of Rock Mechanics and Mining Sciences, 2019
- Combined Early Warning Method for Rock Burst and Its Engineering ApplicationAdvances in Civil Engineering, 2019
- Risk assessment of rockburst via an extended MABAC method under fuzzy environmentTunnelling and Underground Space Technology, 2019
- Experiment on Rockburst Process of Borehole and Its Acoustic Emission CharacteristicsRock Mechanics and Rock Engineering, 2018
- Energy-Based Brittleness Index and Acoustic Emission Characteristics of Anisotropic Coal Under Triaxial Stress ConditionRock Mechanics and Rock Engineering, 2018
- Case histories of rock bursts under complicated geological conditionsBulletin of Engineering Geology and the Environment, 2017
- A review of mechanism and prevention technologies of coal bumps in ChinaJournal of Rock Mechanics and Geotechnical Engineering, 2017
- Combined early warning method for rockburst in a Deep Island, fully mechanized caving faceArabian Journal of Geosciences, 2016
- Microseismic signals of double-layer hard and thick igneous strata separation and fracturingInternational Journal of Coal Geology, 2016
- Hydraulic fracturing after water pressure control blasting for increased fracturingInternational Journal of Rock Mechanics and Mining Sciences, 2011