The Effects of Antenna Properties on Read Distance in Passive Backscatter RFID Systems
Authors:
- Zhijun TangZTZhijun Tang
- 1 April 2009
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 120-123
Abstract
One of the obstacles to wide adaptation of passive RFID systems is the limited read distance or relatively high error rate due to radio interferences in the passive backscatter RFID systems. The most important tag performance characteristic is read distance at which RFID reader can detect the backscattered signal from the tag. The read distance in passive backscatter RFID systems depends on many factors, e.g. the transmitted power, the frequency used, the gain of the reader and tag antennae, the aperture of the antennae, the quality factor of the antennae, the sensitivity of the readers, modulation type and depth, and the application environment etc. This paper presented an overview of passive backscatter RFID systems and the read distance performance of these systems. We focus on presenting an overview of several antenna parameters impacting on read distance in the passive backscatter RFID systems. The function of antenna gain, operational frequency, radar cross-section, antenna quality factor, and polarization mismatch were analyzed.Keywords
This publication has 6 references indexed in Scilit:
- Theory and measurement of backscattering from RFID tagsIEEE Antennas and Propagation Magazine, 2006
- Design Consideration of UHF RFID Tag for Increased Reading Range2006
- An Introduction to RFID TechnologyIEEE Pervasive Computing, 2006
- Radar cross-section analysis for passive RFID systemsIEE Proceedings - Microwaves, Antennas and Propagation, 2006
- Antenna design for UHF RFID tags: a review and a practical applicationIEEE Transactions on Antennas and Propagation, 2005
- Design of ultra-low-cost UHF RFID tags for supply chain applicationsIEEE Communications Magazine, 2004