Using phase boundary mapping to resolve discrepancies in the Mg2Si–Mg2Sn miscibility gap
- 18 February 2021
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 9 (11) , 7208-7215
Abstract
Mg2Si–Mg2Sn compositions within the Mg–Si–Sn materials system have potential as inexpensive, efficient thermoelectrics. These compositions lie specifically along the pseudobinary line with compositions of Mg2Si1−xSnx. The alloying and possible nanostructuring within the miscibility gap could further increase the thermoelectric figure of merit (zT) for these materials. However, the solubility limits of the miscibility gap differ greatly in the literature. Such a discrepancy could be a result of differing Mg-compositions due to excess magnesium added during sample annealing. To define these limits better and explain the change in proposed solubility limits based on magnesium content, the three-phase regions on either side of the pseudobinary phase region are phase boundary mapped and defect energy calculations are performed. This study presents a new understanding of the Mg–Si–Sn ternary phase diagram around the pseudobinary phase region. The solubility limits on either side of the pseudobinary should be essentially identical between the Mg-rich and Mg-poor three-phase regions unless the system temperature is brought above about 565 °C, at which eutectic liquid Mg0.9Sn0.1 forms. This creates a second Mg-rich three-phase region which intersects the pseudobinary with a lower Sn solubility. Thus, samples prepared along the pseudobinary line are not well-defined thermodynamically when excess magnesium is added. Excess Mg can push the system into a new three phase region with Mg2Si1−xSnx composition different from that of the true miscibility gap. This understanding presents new guidelines for evaluating the miscibility gap and assists strategies for microstructure engineering and thermoelectric material processing.Keywords
Funding Information
- National Institute of Standards and Technology (70NANB19H005)
- Northwestern University
- U.S. Department of Energy (DE-SC0020347)
- National Science Foundation (1729487, ECCS-2025633, DMR-1720139)
This publication has 32 references indexed in Scilit:
- Alloy scattering of phononsMaterials Horizons, 2020
- Nano- and Microstructure Engineering: An Effective Method for Creating High Efficiency Magnesium Silicide Based ThermoelectricsACS Applied Materials & Interfaces, 2016
- The panoscopic approach to high performance thermoelectricsEnergy & Environmental Science, 2013
- Thermal conductivity of bulk and nanowire MgSiSnalloys from first principlesPhysical Review B, 2012
- The Criteria for Beneficial Disorder in Thermoelectric Solid SolutionsAdvanced Functional Materials, 2012
- Convergence of Conduction Bands as a Means of Enhancing Thermoelectric Performance of-TypeSolid SolutionsPhysical Review Letters, 2012
- Nanostructured Thermoelectrics: The New Paradigm?Chemistry of Materials, 2009
- Complex thermoelectric materialsNature Materials, 2008
- Highly effectivethermoelectricsPhysical Review B, 2006
- Thermoelectric Cooling and Power GenerationScience, 1999