Study of the Impact of Variations in the Diesel-Nozzle Geometry Parameters on the Layout of Multiple Injection Strategy
Authors:
- 4 March 2002
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
In the present paper the impact of three different geometrical layouts of the discharge nozzle of a high-pressure diesel injector designed is examined for a common rail second generation direct injection system. The paper presents a comparative study of the spray behavior of the three different nozzle layouts connected to a 150 MPa rail-pressure when mounted on a 1.6 liter European passenger car engine. To evaluate experimentally the differences in the fundamental physical spray parameters several specially developed optical visualization techniques are used, which enable phase-Doppler, Laser-sheet and high-speed recordings of dense high pressure sprays. The change in basic spray parameters (time-resolved droplet distribution and spray momentum) caused by the nozzle geometry variation is examined. The impact on the in-cylinder penetration and mixing characteristics is studied with a 3D-numerical simulation code NCF-3D. The paper continues with a discussion of the interaction between nozzle layout and the use of a multi-strike injection strategy adopted in order to decrease the engine-out NOx and particulate emissions. The paper concludes with a discussion of the capability of each of the nozzle layouts to enhance the optimization of the multi-strike injection approach.Keywords
This publication has 9 references indexed in Scilit:
- Comparative Study of the Capability of Mixture- and Liquid Based GDI Configurations to optimize a Lean Stratified SI-Combustion in a Two-Stroke, small Displacement EngineSAE International Journal of Advances and Current Practices in Mobility, 2001
- Atomization of High-Pressure Diesel Spray: Experimental Validation of a New Breakup ModelSAE International Journal of Advances and Current Practices in Mobility, 2001
- Numerical Analysis of Passenger Car HSDI Diesel Engines with the 2nd Generation of Common Rail Injection Systems: The Effect of Multiple Injections on EmissionsSAE International Journal of Advances and Current Practices in Mobility, 2001
- Developments in the Use of Multi-Purpose Numerical Simulation Tools to Optimize Combustion Control Parameters for the 2nd Generation of Lean Burn Stratified GDI EnginesSAE International Journal of Advances and Current Practices in Mobility, 2001
- A Validated Numerical Simulation of Diesel Injector Flow Using a VOF MethodSAE International Journal of Advances and Current Practices in Mobility, 2000
- Enhanced Mixture Preparation Approach for Lean Stratified SI-Combustion by a Combined Use of GDI and Electronically Controlled Valve-Timing2000
- Investigation of Cavitation in a Vertical Multi-Hole InjectorSAE International Journal of Advances and Current Practices in Mobility, 1999
- Comparisons of computed and measured premixed charge engine combustionCombustion and Flame, 1985
- Flow Pattern in Diesel Nozzle Spray HolesProceedings of the Institution of Mechanical Engineers, 1959