Design of Travelling-Wave Rotating Ultrasonic Motor under High Overload Environments: Impact Dynamics Simulation and Experimental Validation
Open Access
- 5 December 2019
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 9 (24) , 5309
Abstract
Nowadays, piezoelectric actuators are widely used, but are rarely applied in high overload environments due to th difficulty implementing them. Traveling wave rotary ultrasonic motors (TRUMs) have the characteristics of variable structure and are insensitive to overload, endowing them with the potential ability of high overload resistance. In this study, four TRUMs with different rotor structures are designed to work under the high-impact acceleration of 10,000 g through modifying the rotors with a designed slotted disc spring. The dynamics model is established, the impact process is simulated, and the results are analyzed successively. The high-impact test, deformation measurement and performance test of the motors are carried out to verify the modification. The results show that performance of the TRUMs with a disc spring declines much less than those without a disc spring after the high-impact test. The TRUM-4 with the modified rotor and disc spring has the best performance, the speed of which decreased only 1.6% at the torque of 0.15 N m, and it is considered to be capable of withstanding the high acceleration of 10,000 g. This work is significance for guiding the ultrasonic motors’ optimization to expand their application in high-overload environments.Keywords
Funding Information
- National Natural Science Foundation of China (51575265)
This publication has 14 references indexed in Scilit:
- Concept and experimental validation of piezoelectric motor–based acceleration sensor in shock environmentJournal of Intelligent Material Systems and Structures, 2019
- Output performance simulation and contact analysis of traveling wave rotary ultrasonic motor based on ADINAComputers & Structures, 2019
- Development and experiment evaluation of an H-shape linear piezoelectric actuator operated in stepping modeCeramics International, 2018
- Modeling and controller design of a 6-DOF precision positioning systemMechanical Systems and Signal Processing, 2018
- Development of a Novel Parasitic-Type Piezoelectric ActuatorIEEE/ASME Transactions on Mechatronics, 2016
- Review of micro/nano machining by utilizing elliptical vibration cuttingInternational Journal of Machine Tools and Manufacture, 2016
- Application of Disk Springs for Manufacturing Vibration Isolators with Quasi-Zero StiffnessChemical and Petroleum Engineering, 2015
- Theoretical Design and Characteristics Analysis of a Quasi-Zero Stiffness Isolator Using a Disk Spring as Negative Stiffness ElementShock and Vibration, 2015
- An inverse algorithm of nonlinear load-displacement for a slotted disc spring geometric designInternational Journal of Precision Engineering and Manufacturing, 2012
- The Slotted Conical Disk SpringJournal of Engineering for Industry, 1973