Reliability modeling for multistage systems subject to competing failure processes
- 30 April 2021
- journal article
- research article
- Published by Wiley in Quality and Reliability Engineering International
- Vol. 37 (6) , 2936-2949
Abstract
In this paper, a novel multistage reliability model is provided as systems are often divided into many stages according to system degradation characteristics. Multistage hard failure (caused by random shock) process (MHFP) and multistage soft failure (caused by random shock and continuous degradation) process (MSFP) are introduced to describe the competing failure processes, where either the MSFP or MHFP would break down the system. The shock processes impact the system in three ways: (1) fatal load shocks cause hard failure immediately in the hard failure process; (2) time shocks cause a hard failure threshold changing; (3) damage load shocks cause degradation level increasing in the soft failure process. In this paper, a density function dispersion method is carried out to address the multistage reliability model, and the effectiveness of the proposed models is demonstrated by reliability analysis with the one‐stage model. Finally, the multistage model is applied to a case study, the degradation process is divided into three stages, and the hard failure threshold can be transmitted twice. The proposed model can be applied in other multistage situations, and the calculation method can satisfy the accuracy requirements.Keywords
This publication has 30 references indexed in Scilit:
- Integrating Random Shocks Into Multi-State Physics Models of Degradation Processes for Component Reliability AssessmentIEEE Transactions on Reliability, 2014
- Study on the theory, method and model for mechanical dynamic assembly reliability optimizationProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2014
- Reliability and maintenance modeling for systems subject to multiple dependent competing failure processesIIE Transactions, 2010
- Quality control and improvement for multistage systems: A surveyIIE Transactions, 2009
- Generalized Shock Models Based on a Cluster Point ProcessIEEE Transactions on Reliability, 2006
- The availability of inspected systems subject to shocks and graceful degradationIEEE Transactions on Reliability, 2002
- Shocks, runs and random sumsJournal of Applied Probability, 2001
- Mixed Shock ModelsBernoulli, 2001
- Availability and mean life time prediction of multistage degraded system with partial repairsReliability Engineering & System Safety, 1997
- Reliability assessment based on accelerated degradation: a case studyIEEE Transactions on Reliability, 1991