Highly Efficient and Eco-Friendly Thermal-Neutron-Shielding Materials Based on Recycled High-Density Polyethylene and Gadolinium Oxide Composites
Open Access
Abstract
Due to the increasing demands for improved radiation safety and the growing concerns regarding the excessive use of plastics, this work aimed to develop effective and eco-friendly thermal-neutron-shielding materials based on recycled high-density polyethylene (r-HDPE) composites containing varying surface-treated gadolinium oxide (Gd2O3) contents (0, 5, 10, 15, and 20 wt%). The results indicate that the overall thermal-neutron-shielding properties of the r-HDPE composites were enhanced with the addition of Gd2O3, as evidenced by large reductions in I/I0, HVL, and TVL, as well as the substantial increases in ∑t and ∑t/ρ of the composites. Furthermore, the results reveal that the values for tensile properties initially increased up to 5–15 wt% of Gd2O3 and then gradually decreased at higher contents. In addition, the results show that the addition of Gd2O3 particles generally increased the density (ρ), the remaining ash at 600 °C, and the degree of crystallinity (%XC) of the composites. This work also determined the effects of gamma irradiation on relevant properties of the composites. The findings indicate that following gamma aging, the tensile modulus slightly increased, while the tensile strength, elongation at break, and hardness (Shore D) showed no significant (p < 0.05) differences, except for the sample containing 5 wt% of Gd2O3, which exhibited a noticeable reduction in elongation at break. Furthermore, by comparing the neutron-shielding and mechanical properties of the developed r-HDPE composites with common borated polyethylene (PE) containing 5 wt% and 15 wt% of boron, the results clearly indicate the superior shielding and tensile properties in the r-HDPE composites, implying the great potential of r-HDPE composites to replace virgin plastics as effective and more eco-friendly shielding materials.Keywords
Funding Information
- Kasetsart University Research and Development Institute (KURDI) (FF(KU)51.67, N41A650069)
- Thailand Institute of Nuclear Technology (Public Organization) (FF(KU)51.67, N41A650069)
- National Research Council of Thailand (FF(KU)51.67, N41A650069)
This publication has 62 references indexed in Scilit:
- Comparisons of enhanced thermal neutron‐ and gamma‐shielding properties in UHMWPE composites containing surface‐treated Sm2O3 and Gd2O3 particlesPolymers for Advanced Technologies, 2023
- Ultrahigh molecular weight polyethylene fiber/boron nitride composites with high neutron shielding efficiency and mechanical performanceAdvanced Composites and Hybrid Materials, 2022
- Effects of gamma irradiation on 3D-printed polylactic acid (PLA) and high-density polyethylene (HDPE)Polymer Bulletin, 2020
- Effect of surface treatments and filler loading on the properties of hemp fiber/natural rubber compositesCellulose, 2019
- Effect of Different Reinforcing Fillers on Properties, Interfacial Compatibility and Weatherability of Wood-plastic CompositesJournal of Bionic Engineering, 2019
- Critical review, with an optimistic outlook, on Boron Neutron Capture Therapy (BNCT)Applied Radiation and Isotopes, 2014
- Dynamic rheology and morphology of HDPE‐fumed silica composites: Effect of interface modificationPolymer Engineering & Science, 2012
- Radiation safety program for the cardiac catheterization laboratoryCatheterization and Cardiovascular Interventions, 2011
- Analysis of hydrolysis process of γ-methacryloxypropyltrimethoxysilane and its influence on the formation of silane coatings on 6063 aluminum alloyApplied Surface Science, 2009
- A novel approach for calculating starch crystallinity and its correlation with double helix content: A combined XRD and NMR studyBiopolymers, 2008