The Physical Mechanism of Heat Transfer Augmentation in Stagnating Flows Subject to Freestream Turbulence
- 2 November 2010
- journal article
- Published by Wiley in Journal of Heat Transfer
- Vol. 133 (2) , 021901
Abstract
Experiments have been performed in a water tunnel facility to examine the physical mechanism of heat transfer augmentation by freestream turbulence in classical Hiemenz flow. A unique experimental approach to studying the problem is developed and demonstrated herein. Time-resolved digital particle image velocimetry (TRDPIV) and a new variety of thin-film heat flux sensor called the heat flux array (HFA) are used simultaneously to measure the spatiotemporal influence of coherent structures on the heat transfer coefficient as they approach and interact with the stagnation surface. Laminar flow and heat transfer at low levels of freestream turbulence (Tux¯=0.5–1.0%) are examined to provide baseline flow characteristics and heat transfer coefficients. Similar experiments using a turbulence grid are performed to examine the effects of turbulence with mean streamwise turbulence intensity of Tux¯=5.0% and an integral length scale of Λx¯=3.25 cm. At a Reynolds number of ReD¯=U∞¯D/υ=21,000, an average increase in the mean heat transfer coefficient of 64% above the laminar level was observed. Experimental studies confirm that coherent structures play a dominant role in the augmentation of heat transfer in the stagnation region. Calculation and examination of the transient physical properties for coherent structures (i.e., circulation, area averaged vorticity, integral length scale, and proximity to the surface) shows that freestream turbulence is stretched and vorticity is amplified as it is convected toward the stagnation surface. The resulting stagnation flow is dominated by dynamic, counter-rotating vortex pairs. Heat transfer augmentation occurs when the rotational motion of coherent structures sweeps cooler freestream fluid into the laminar momentum and thermal boundary layers into close proximity of the heated stagnation surface. Evidence in support of this mechanism is provided through validation of a new mechanistic model, which incorporates the transient physical properties of tracked coherent structures. The model performs well in capturing the essential dynamics of the interaction and in the prediction of the experimentally measured transient and time-averaged turbulent heat transfer coefficients.Keywords
This publication has 26 references indexed in Scilit:
- The role of turbulence length scale and turbulence intensity on forced convection from a heated horizontal circular cylinderExperimental Thermal and Fluid Science, 2007
- Effect of turbulent integral length scale on heat transfer around a circular cylinder placed cross to an air flowExperimental Thermal and Fluid Science, 2002
- Measurements of the Influence of Integral Length Scale on Stagnation Region Heat TransferInternational Journal of Rotating Machinery, 1996
- Influence of Turbulence Parameters, Reynolds Number, and Body Shape on Stagnation-Region Heat TransferJournal of Heat Transfer, 1995
- Darryl E. Metzger Memorial Session Paper: An Account of Free-Stream-Turbulence Length Scale on Laminar Heat TransferJournal of Turbomachinery, 1995
- The effect of turbulence on heat transfer from heated cylindersInternational Journal of Heat and Mass Transfer, 1975
- An analytical study of freestream turbulence effects on stagnation point flow and heat transfer1974
- Effects of Turbulence on Laminar Skin Friction and Heat TransferThe Physics of Fluids, 1966
- The Effect of Free-Stream Turbulence on Heat Transfer Rates1966
- On the sensitivity of heat transfer in the stagnation-point boundary layer to free-stream vorticityJournal of Fluid Mechanics, 1963