Online Condition Monitoring of Bond Wire Degradation in Inverter Operation
- 1 September 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4115-4121
Abstract
This paper presents a condition monitoring system for the online detection of the degradation of power switches in medium power inverter topologies. The monitoring, suitable for MOSFET and IGBTs, is based on the measurement of both on-state voltage of the semiconductor and the voltage drop in the bond wires. Through these measurements, the main failure mechanisms, been these the degradation of the solder joints and the bond wire connections, can be anticipated. The proposed system has been implemented in a setup and tests have been performed in static conditions and as an inverter, with a switching frequency up to 5 kHz. Moreover, this paper proposes an alternative routine appropriate for those applications in which a higher switching frequency is required. This routine has been validated with the DUT switching at 50 kHz. In all the circumstances, the prototype proved its efficiency to measure accurately and its capability to detect the bond wire degradation.Keywords
This publication has 12 references indexed in Scilit:
- Influence of SiC technology in a railway traction DC-DC converter design evolution2017
- In-Service Diagnostics for Wire-Bond Lift-off and Solder Fatigue of Power Semiconductor PackagesIEEE Transactions on Power Electronics, 2017
- Effects of Auxiliary-Source Connections in Multichip Power ModuleIEEE Transactions on Power Electronics, 2016
- Reliability Improvement of Power Converters by Means of Condition Monitoring of IGBT ModulesIEEE Transactions on Power Electronics, 2016
- Study and Handling Methods of Power IGBT Module Failures in Power Electronic Converter SystemsIEEE Transactions on Power Electronics, 2014
- In Situ Diagnostics and Prognostics of Solder Fatigue in IGBT Modules for Electric Vehicle DrivesIEEE Transactions on Power Electronics, 2014
- Transitioning to Physics-of-Failure as a Reliability Driver in Power ElectronicsIEEE Journal of Emerging and Selected Topics in Power Electronics, 2013
- Power cycling testing and FE modelling focussed on Al wire bond fatigue in high power IGBT modulesMicroelectronics Reliability, 2012
- Condition Monitoring for Device Reliability in Power Electronic Converters: A ReviewIEEE Transactions on Power Electronics, 2010
- Active thermal control of power electronic modulesIEEE Transactions on Industry Applications, 2006