Flexural performance of composite grid panels with deep ribs
Authors:
- 2 April 2020
- journal article
- research article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 39 (11-12) , 443-458
Abstract
This paper reports on the flexural performance of an innovative composite grid panel composed of glass fiber-reinforced polymer face skins and deep glass fiber-reinforced polymer ribs with a trapezoidal cross-section. Three-point and four-point bending experiments were performed to demonstrate the feasibility of the composite grid panels under concentrated loads. Compared with the composite grid panels without skins, maximum increases in the ultimate load, and initial bending stiffness of the composite grid panels of approximately 68.2% and 306.7%, respectively, were achieved with the existence of both upper and lower skins. Furthermore, an analytical analysis was carried out to predict the initial bending stiffness and mid-span deflection of the composite grid panels. A comparison of the analytical and experimental results showed that the analytical model accurately predicted the flexural performance of the composite grid panels subjected to three-point and four-point bending. Failure mechanism maps were constructed to predict the mechanical response and failure modes of the composite grid panels. Moreover, the validated model was used in a parametric analytical study to further estimate the effects of various parameters on the flexural performance of the composite grid panels. The results demonstrated that the initial bending stiffness can be significantly improved by increasing the trapezoidal section ratio, face skin thickness, and grid height.Keywords
Funding Information
- The Natural Science Foundation for Distinguished Young Scholars of Jiangsu Province (BK20190034)
- The National Natural Science Foundation of China (51778285)
- the Scientific Research Project of Hunan Provincial Department of Transportation (201916)
This publication has 25 references indexed in Scilit:
- Numerical modeling of stresses and buckling loads of isogrid lattice composite structure cylindersInternational Journal of Engineering, Science and Technology, 2018
- Static behavior of three-dimensional ıntegrated core sandwich composites subjected to three-point bendingJournal of Reinforced Plastics and Composites, 2013
- The Effects of Helical Ribs’ Number and Grid Types on the Buckling of Thin-walled GFRP-stiffened Shells under Axial LoadingJournal of Reinforced Plastics and Composites, 2010
- Mechanical properties of lattice grid compositesActa Mechanica Sinica, 2008
- Parametric optimization of grid-stiffened composite panels for maximizing their performance under transverse loadingComposite Structures, 2007
- Energy absorption and damage evaluation of grid stiffened composite panels under transverse loadingComposites Part B: Engineering, 2005
- Analytical/experimental investigation of energy absorption in grid-stiffened composite structures under transverse loadingExperimental Mechanics, 2004
- Optimization for buckling loads of grid stiffened composite panelsComposite Structures, 2003
- Fabrication and testing of thin composite isogrid stiffened panelComposite Structures, 2000
- WRINKLING AND OTHER FORMS OF LOCAL INSTABILITY1969