Spiramycin adsorption behavior on activated bentonite, activated carbon and natural phosphate in aqueous solution
- 8 April 2019
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (16) , 15953-15972
Abstract
Efficacy of activated bentonite, activated carbon, and natural phosphate under experimental conditions was tested as low-cost adsorbents for spiramycin antibiotic removal from aqueous solution. Equilibrium kinetic and isotherm adsorption process are well described by pseudo-second order and Langmuir isotherm models for activated bentonite and activated carbon, while natural phosphate follows pseudo-first order and Freundlich models, respectively. Obtained results revealed that activated bentonite has the highest adsorption capacity (260.3 mg/g) as compared to activated carbon (80.3 mg/g) and natural phosphate (1.7 mg/g). The adsorption capacity decreases for all adsorbents in the presence of NaCl. The adsorption processes are facilitated in the alkaline pH range for activated bentonite and activated carbon, whereas, for natural phosphate, the acidic pH range is favorable. They are involving ion exchange and hydrogen bond mechanisms as well as Van der Waals forces and also π interactions for activated carbon. Thermodynamic calculation shows that spiramycin adsorption is endothermic and spontaneous on all adsorbents. The activated bentonite reusability is more efficient by more than 95% in two-step desorption using NaOH and HCl eluents compared to activated carbon. Thus, activated bentonite is a promising adsorbent for spiramycin removal from aqueous solution.Keywords
This publication has 54 references indexed in Scilit:
- Simultaneous determination of cation exchange capacity and surface area of acid activated bentonite powders by methylene blue sorptionApplied Surface Science, 2012
- Source, occurrence and fate of antibiotics in the Italian aquatic environmentJournal of Hazardous Materials, 2010
- Initial behavior of intraparticle diffusion model used in the description of adsorption kineticsChemical Engineering Journal, 2009
- An overview of analytical methodologies for the determination of antibiotics in environmental watersAnalytica Chimica Acta, 2009
- Structure and mechanical properties of polyamide 6/Brazilian clay nanocompositesMaterials Research, 2009
- Pre-treatment of hospital wastewater by coagulation–flocculation and flotationBioresource Technology, 2009
- Study of equilibrium, kinetic and thermodynamic parameters about methylene blue adsorption onto natural zeoliteChemical Engineering Journal, 2009
- Influence of Acid Activation of Kaolinite and Montmorillonite on Adsorptive Removal of Cd(II) from WaterIndustrial & Engineering Chemistry Research, 2007
- The adsorption kinetics of the cationic dye, methylene blue, onto clayJournal of Hazardous Materials, 2006
- The removal of colour from effluent using various adsorbents—III. Silica: Rate processesWater Research, 1980