An investigation of the flowfield through a variable geometry turbine stator with vane endwall clearance
- 1 December 2006
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 220 (8) , 899-910
Abstract
Variable geometry turbines provide an extra degree of flexibility in air management in turbocharged engines. The pivoting stator vanes used to achieve the variable turbine geometry necessitate the inclusion of stator vane endwall clearances. The consequent leakage flow through the endwall clearances impacts the flow in the stator vane passages and an understanding of the impact of the leakage flow on stator loss is required. A numerical model of a typical variable geometry turbine was developed using the commercial CFX-10 computational fluid dynamics software, and validated using laser doppler velocimetry and static pressure measurements from a variable geometry turbine with stator vane endwall clearance. Two different stator vane positions were investigated, each at three different operating conditions representing different vane loadings. The vane endwall leakage was found to have a significant impact on the stator loss and on the uniformity of flow entering the turbine rotor. The leakage flow changed considerably at different vane positions and flow incidence at vane inlet was found to have a significant impact.Keywords
This publication has 7 references indexed in Scilit:
- 1998 Turbomachinery Committee Best Paper Award: An Experimental Study of Tip Clearance Flow in a Radial Inflow TurbineJournal of Turbomachinery, 1999
- The Modelling of Flow in the Volute and Vanes of a High Pressure Radial Inflow Turbine1993
- The Design and Testing of a Radial Flow Turbine for Aerodynamic Research1991
- The Computational Experiment Applied to Aerodynamic Design and Analysis of TurbomachinerySAE International Journal of Advances and Current Practices in Mobility, 1990
- Effects of Tip Clearance of Nozzle Vanes on Performance of Radial Turbine Rotor1989
- Three Dimensional Flow in Radial-Inflow Turbines1988
- The influences of tip-clearance on the performance of nozzle blades of radial turbines.JSME International Journal, 1987