Cantilever Beam with a Single Fiber Bragg Grating to Measure Temperature and Transversal Force Simultaneously
Open Access
Abstract
This work investigates a new interrogation method of a fiber Bragg grating (FBG) sensor based on longer and shorter wavelengths to distinguish between transversal forces and temperature variations. Calibration experiments were carried out to examine the sensor’s repeatability in response to the transversal forces and temperature changes. An automated calibration system was developed for the sensor’s characterization, calibration, and repeatability testing. Experimental results showed that the FBG sensor can provide sensor repeatability of 13.21 pm and 17.015 pm for longer and shorter wavelengths, respectively. The obtained calibration coefficients expressed in the linear model using the matrix enabled the sensor to provide accurate predictions for both measurements. Analysis of the calibration and experiment results implied improvements for future work. Overall, the new interrogation method demonstrated the potential to employ the FBG sensing technique where discrimination between two/three measurands is needed.Keywords
Funding Information
- Universiti Kebangsaan Malaysia (MI-2020-001, IF0419IF1082)
This publication has 18 references indexed in Scilit:
- Spatial Resolution Enhancement of Time Domain Multiplexing Fiber Bragg Grating Sensor by Employing Differential Golay Codes2020
- Signal Generation using System on Chip for Coded Fiber Bragg Grating Sensor2020
- Pulse Compressed Time Domain Multiplexed Fiber Bragg Grating Sensor: A Comparative StudyIEEE Access, 2018
- Simultaneous strain and temperature measurement using a single fiber Bragg grating embedded in a composite laminateSmart Materials and Structures, 2017
- Chirped fiber Bragg grating written in highly birefringent fiber in simultaneous strain and temperature monitoringApplied Optics, 2017
- Simultaneous measurement of strain and temperature using fiber Bragg grating sensors embedded in hybrid composite laminatesMeasurement Science and Technology, 2011
- Simultaneous Measurement of Refractive Index and Temperature Using a Hybrid Fiber Bragg Grating/Long-Period Fiber Grating ConfigurationFiber and Integrated Optics, 2009
- Fibre Bragg gratings in structural health monitoring—Present status and applicationsSensors and Actuators A: Physical, 2008
- Temperature and strain discrimination using a single tilted fibre Bragg gratingOptics Communications, 2007
- Simultaneous Strain and Temperature Measurements With Fiber Bragg Grating Written in Novel Hi-Bi Optical FiberIEEE Photonics Technology Letters, 2004