IIR digital filter design implemented on FPGA for myoelectric signals
- 1 May 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Abstract
In order to attenuate the added noise by electric network used by myoelectric signals acquisition equipment, in this research work, it is developed an IIR digital filter implemented on FPGA. This filter removes a specific spectra frequencies without adding noise to the signal, which allows a better performance in the usage that is given to the signals. The filter coefficients are taken and proved from MATLAB functions. Then, those are transferred to the filter design in the FPGA. For this purpose, it was used a Basys 3 of Xilinx Artix-7 family and the design was implemented in Vivado Design Suite. The filtered signal does not present additional noise and it was eliminated the desired frequency.Keywords
This publication has 7 references indexed in Scilit:
- Digital filter design and performance analysis of dynamic temperature signal denoise based on FPGA2016
- FPGA based filters for EEG pre-processing2016
- FPGA based parallel implementation of morphological filters2016
- A comparative analysis of hardware techniques for implementation of IIR digital filter on FPGA2015
- Efficient IIR notch filter design using Minimax optimization for 50Hz noise suppression in ECG2015
- Reconfigurable architecture design of FIR and IIR in FPGA2015
- FPGA architectures for real-time 2D/3D FIR/IIR plane wave filters2004