Combined effects of fuel and intake air preheating for improving diesel engine operating parameters running with biodiesel blends
- 1 July 2018
- journal article
- conference paper
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 10 (4) , 043103
Abstract
In this study, the combined effects of fuel and intake air preheating on the performance, combustion, and emission parameters of a diesel engine running on different preheated blends of fuel are studied. The preheated Palm oil methyl ester (POME) through waste heat exhaust gases is chosen as blended fuel to achieve better fuel injection characteristics. The increase in the fuel-preheated temperature shows the drop in kinematic viscosity and density values of POME. At a fuel preheating temperature of 114 °C, the viscosity and density of POME drop to 3.74 mm2/s and 871 kg/m3 which are closer to values for mineral diesel (3.35 mm2/s at 40 °C and 842 kg/m3 at 27 °C). Preheating optimized POME at inlet temperatures of 90 °C and 102 °C in a diesel engine results in the improvement of the brake specific fuel consumption, brake thermal efficiency (BTHE), and emissions (CO, HC, and CO2) with a slight increase in NOx compared to unheated POME at varying loads. In addition, preheated intake air at elevated temperature assisted further enhancement of the engine performance, combustion, and reduction of emission parameters of a diesel engine fueled with preheated blends of fuel.Keywords
This publication has 22 references indexed in Scilit:
- Adjusting the operating characteristics to improve the performance of an emulsified palm oil methyl ester run diesel engineEnergy Conversion and Management, 2013
- Variation of performance and emission characteristics of a diesel engine fueled with diesel, rapeseed oil and hazelnut oil methyl ester blendsRenewable Energy, 2012
- A comprehensive review on biodiesel as an alternative energy resource and its characteristicsRenewable and Sustainable Energy Reviews, 2012
- Review of biodiesel composition, properties, and specificationsRenewable and Sustainable Energy Reviews, 2012
- Effects of preheating vegetable oils on performance and emission characteristics of two diesel enginesBiomass and Bioenergy, 2011
- A comprehensive experimental investigation of combustion and heat release characteristics of a biodiesel (hazelnut kernel oil methyl ester) fueled direct injection compression ignition engineFuel, 2010
- An Investigation on the Effect in the Viscosity of Canola and Corn Oil Biodiesels at a Temperature Range of 0 to 100°CEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2009
- Experimental study of the spray characteristics of biodiesel based on inedible oilBiotechnology Advances, 2009
- Heat transfer coefficients of shell and coiled tube heat exchangersExperimental Thermal and Fluid Science, 2009
- Effect of biodiesel fuels on diesel engine emissionsProgress in Energy and Combustion Science, 2008