Effect of polymerization degree on debinding induced cracking in three‐dimensional printed silica glass
Authors:
- 30 November 2025
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (1)
Abstract
In recent years, the digital light processing (DLP) technology has demonstrated tremendous potential in the field of silica glass manufacturing. However, the size of glass components produced is usually only a few millimeters due to the fact that large‐sized glass components are prone to cracking during the manufacturing process, especially induced by the thermal degradation of cured resin during the debinding process. This study elaborates in detail on the effect of polymerization degree on debinding induced cracking in 3D printed silica glasses. Specifically, green parts cured by a DLP 3D printer with photosensitive resin containing silica nanoparticles were manufactured under different silica particle loadings, light intensities, and exposure time. The results indicate that the polymerization degree decreases with increasing silica loading, while increases with increasing light intensities and exposure times. The higher polymerization degrees led to serious cracking. These findings are crucial for optimizing the quality and structural integrity of 3D printed silica glass components.Keywords
This publication has 36 references indexed in Scilit:
- RETRACTED: The influence of plasticizers on the process and properties of digital light processing 3D printed silica glassCeramics International, 2025
- All Solid Photonic Crystal Fiber Enabled by 3D Printing Fiber Technology for Sensing of Multiple ParametersAdvanced Sensor Research, 2024
- Facile Fabrication of Silica Glass Embedded with NiO Nanoparticles by 3D Printing Technology and its Optical NonlinearityAdvanced Photonics Research, 2023
- Effect of sintering condition on the attenuation of silica glasses fabricated by additive manufacturingCeramics International, 2023
- Crack nucleation and growth induced by thermal phase transition for polymer bonded energetic composite materialsComposite Structures, 2023
- Effects of slurry mixing methods and solid loading on 3D printed silica glass parts based on DLP stereolithographyCeramics International, 2020
- Selective laser melting manufactured porous Fe-based metallic glass matrix composite with remarkable catalytic activity and reusabilityApplied Materials Today, 2020
- Study on defect-free debinding green body of ceramic formed by DLP technologyCeramics International, 2020
- DAEM kinetics analysis and finite element simulation of thermal debinding process for a gelcast SiAlON green bodyCeramics International, 2019
- 3D Printing of Lotus Root‐Like Biomimetic Materials for Cell Delivery and Tissue RegenerationAdvanced Science, 2017