Morphing optimization of flow and heat transfer in concentric tube heat exchangers
Authors:
Open Access
- 1 September 2023
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (9)
Abstract
Concentric tube heat exchangers are vital in various industrial applications, including chemical, process, energy, mechanical, and aeronautical engineering. Advancements in heat transfer efficiency present a significant challenge in contemporary research and development. This study concerns optimizing flow and heat transfer in concentric tube heat exchangers by morphing the tube's walls. The adjoint shape optimization approach is implemented in a fully turbulent flow regime. The effect of inner tube deformation on flow physics and heat transfer is examined. The results show that morphing can lead to a 54% increase in the heat transfer rate and a 47% improvement in the overall heat transfer coefficient compared to straight concentric tube designs. Moreover, the thermal-hydraulic performance factor is calculated to account for the relative increase in heat transfer when the optimal and initial designs are operated under the same pumping power. A thermal-hydraulic performance factor of 1.2 is obtained for the new design, showing that the heat transfer enhancement caused by morphing the tube's walls outweighs the increase in pumping power. The physics of a radial flow, resulting from an adverse pressure gradient in an annular region caused by the successive inner tube deformation, significantly augments heat transfer. This study shows morphing can lead to higher thermal efficiencies, and numerical optimization can assist in achieving this goal.Keywords
This publication has 46 references indexed in Scilit:
- An efficient numerical model for hydrodynamic parameterization in 2D fractured dual-porosity mediaAdvances in Water Resources, 2014
- A comprehensive review on passive heat transfer enhancements in pipe exchangersRenewable and Sustainable Energy Reviews, 2013
- A Discrete Adjoint Approach for the Optimization of Unsteady Turbulent FlowsFlow, Turbulence and Combustion, 2013
- Design optimization of shell-and-tube heat exchanger using particle swarm optimization techniqueApplied Thermal Engineering, 2010
- Large eddy simulation using high-resolution and high-order methodsPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2009
- Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD ApplicationsJournal of Fluids Engineering, 2008
- Field synergy principle for enhancing convective heat transfer––its extension and numerical verificationsInternational Journal of Heat and Mass Transfer, 2002
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994
- Upwind Second-Order Difference Schemes and Applications in Aerodynamic FlowsAIAA Journal, 1976
- Application of rough surfaces to heat exchanger designInternational Journal of Heat and Mass Transfer, 1972