Fundamental characterization of lubrication effects through various cooling lubricants in the chip formation zone
Authors:
Open Access
- 1 August 2024
- journal article
- research article
- Published by Springer Nature in Production Engineering
- Vol. 19 (1) , 173-185
Abstract
Using cooling lubricants in metalworking requires a high consumption of energy and resources. However, cooling lubricants serve to increase the productivity and quality of these processes. Accordingly, it is necessary to expand the efficiency of their application. This requires fundamental understanding of the working mechanisms. Driven by this motivation, this publication compares six cooling lubricants regarding their lubrication effect in orthogonal cutting. Three types of fluid supply, each conducted on a specific special machine tool for chip formation analysis, and two cutting speeds have been used in the tests. In order to analyze the lubricating effect of these different scenarios, force measurements were carried out and the chip formation was recorded with high-speed recordings. It was found that the process improvements due to lubrication is determined by the interaction of fluid properties, supply strategy and cutting speed. Moreover, clear limitations of water-based cooling lubricants (especially oil-water-emulsions) in the ability to lubricate the chip formation zone have been determined and quantified.Keywords
Funding Information
- Technische Universität Dortmund
This publication has 41 references indexed in Scilit:
- Evaluation of methods for measuring tool-chip contact length in wet machining using different approaches (microtextured tool, in-situ visualization and restricted contact tool)Production Engineering, 2022
- Influence of metal working fluid on chip formation and mechanical loads in orthogonal cuttingThe International Journal of Advanced Manufacturing Technology, 2021
- Experimental investigation of specific cutting forces and estimation of the heat partitioning under increasing tool wear in machining nickel-based super alloy IN 718Production Engineering, 2020
- Metalworking fluids—Mechanisms and performanceCIRP Annals, 2015
- Effect of microscale texture on cutting performance of WC/Co-based TiAlN coated tools under different lubrication conditionsApplied Surface Science, 2015
- Evaluating the effect of coolant pressure and flow rate on tool wear and tool life in the steel turning operationThe International Journal of Advanced Manufacturing Technology, 2010
- On The Measurement of Temperature in Material Removal ProcessesCIRP Annals, 2007
- Mechanics of metal cutting and cutting fluid actionInternational Journal of Machine Tool Design and Research, 1977
- Surface phenomena in solids during deformation and fracture processesProgress in Surface Science, 1972
- On the action of metal cutting fluids at low speedsWear, 1959