Synchronized Multi-Laser Powder Bed Fusion (M-LPBF) Additive Manufacturing: A Technique for Controlling the Microstructure of Ti–6Al–4V
Open Access
- 31 October 2024
- journal article
- research article
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 8 (6) , 242
Abstract
One of the technological hurdles in the widespread application of additive manufacturing is the formation of undesired microstructure and defects, e.g., the formation of columnar grains in Ti-6Al-4V—the columnar microstructure results in anisotropic mechanical properties, a reduction in ductility, and a decrease in the endurance limit. Here, we present the potential implementation of a hexagonal array of synchronized lasers to alter the microstructure of Ti–6Al–4V toward the formation of preferable equiaxed grains. An anisotropic heat transfer model is employed to obtain the temporal/spatial temperature distributions and construct the solidification map for various process parameters, i.e., laser power, scanning speed, and the internal distance among lasers in the array. Approximately 55% of the volume fraction of equiaxed grains is obtained using a laser power of P = 500 W and a scanning speed of v = 100 mm/s. The volume fraction of the equiaxed grains decreases with increasing scanning velocity; it drops to 38% for v = 1000 mm/s. This reduction is attributed to the decrease in absorbed heat and thermal crosstalk among lasers, i.e., the absorbed heat is higher at low scanning speeds, promoting thermal crosstalk between melt pools and subsequently forming a large volume fraction of equiaxed grains. Additionally, a degree of overlap between lasers in the array is required for high scanning speeds (v = 1000 mm/s) to form a coherent melt pool, although this is unnecessary for low scanning speeds (v = 100 mm/s).Keywords
Funding Information
- The Ohio Super Computing (OSC) computational grant (ECS-PWSU0463)
This publication has 47 references indexed in Scilit:
- Controlling the Glassy State toward Structural and Mechanical Enhancement: Additive Manufacturing of Bulk Metallic Glass Using Advanced Laser Beam Shaping TechnologyAdvanced Functional Materials, 2023
- A digital twin of synchronized circular laser array for powder bed fusion additive manufacturingThe International Journal of Advanced Manufacturing Technology, 2022
- Anisotropy of microstructures and mechanical properties in FeCoNiCr 0.5 high‐entropy alloy prepared via selective laser meltingRare Metals, 2022
- The Columnar-to-Equiaxed Transition in Melt Pools During Laser Powder Bed Fusion of M2 SteelMetallurgical and Materials Transactions A, 2021
- Modeling the effects of coordinated multi-beam additive manufacturingThe International Journal of Advanced Manufacturing Technology, 2021
- Residual stress reduction of LPBF-processed CM247LC samples via multi laser beam strategiesThe International Journal of Advanced Manufacturing Technology, 2021
- Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive ManufacturingAdvanced Engineering Materials, 2019
- Mechanical Anisotropy Investigated in the Complex SLM‐Processed Sc‐ and Zr‐Modified Al–Mg Alloy MicrostructureAdvanced Engineering Materials, 2018
- The effect of multi-beam strategies on selective laser melting of stainless steel 316LAdditive Manufacturing, 2018
- Numerical modelling of the impact of energy distribution and Marangoni surface tension on track shape in selective laser melting of ceramic materialAdditive Manufacturing, 2018