Experimental investigation of the dynamic load sharing of planetary gearboxes
Authors:
Open Access
- 8 July 2021
- journal article
- research article
- Published by Springer Nature in Forschung im Ingenieurwesen
- Vol. 86 (3) , 295-302
Abstract
Due to their compactness and power density, planetary gearboxes are used for a wide range of high-performance applications in the automotive, aviation and marine sector. Aerospace applications in particular benefit from a full use of the load capacity potential to meet the requirements for lightweight construction and efficiency. Against this background, the load sharing between the individual planetary gears plays a decisive role. A uniform load sharing enables the design of the single tooth meshes without load increases and oversizing. However, due to manufacturing and assembly deviations, a perfect load sharing is technically not feasible. These load increases are taken into account in the standard calculation of the load capacity of planetary gearboxes by the mesh load factor Kγ. The load sharing in planetary gearboxes is influenced by a number of factors, such as the rigidity of shafts, housing and bearings, the number of planets, the quality of the gear wheels and the operating conditions. Detailed simulations or extensive experimental measurements are required to determine the exact load sharing. For new designs of planetary gearboxes, there are only simplified assumptions available, based on the number of planets and a rough estimation of the operating range. Especially additional dynamic forces, due to operation in high-speed ranges or near resonance frequencies, can lead to a considerable change of the dynamic load sharing compared to the static load sharing and cause an uncertainty in the design. Thus, in this paper the dynamic load sharing behaviour is investigated from 0 to 6800 rpm sun speed for different loads. Based on the experimental data recommendations for the design of planetary gearboxes under consideration of the operating conditions are derived.Keywords
Funding Information
- Bundesministerium für Wirtschaft und Technologie (20T1504)
- Technische Universität München
This publication has 18 references indexed in Scilit:
- A dynamic model to study the influence of planet position errors in planetary gearsJournal of Sound and Vibration, 2012
- A New Method to Measure Planet Load Sharing and Sun Gear Radial Orbit of Planetary Gear SetsJournal of Mechanical Design, 2012
- Internal Gear Strains and Load Sharing in Planetary Transmissions: Model and ExperimentsJournal of Mechanical Design, 2008
- An Experimental Study of the Influence of Manufacturing Errors on the Planetary Gear Stresses and Planet Load SharingJournal of Mechanical Design, 2008
- Load sharing characteristics of planetary transmissionsMechanism and Machine Theory, 1994
- Measurement and Some Discussions on Dynamic Load Sharing in Planetary GearsBulletin of JSME, 1986
- Dynamic Behavior of Planetary Gear : 4th Report, Influence of the Transmitted Tooth Load on the Dynamic Increment LoadBulletin of JSME, 1979
- Dynamic Behavior of Planetary Gear : 2nd Report, Displacement of Sun Gear and Ring GearBulletin of JSME, 1976
- Dynamic Behavior of Planetary Gear : 1st Report Load Distribution in Planetary GearBulletin of JSME, 1976
- Dynamic Tooth Loads in Epicyclic GearsJournal of Engineering for Industry, 1974