A High-Precision Energy-Efficient GPS Time-Sync Method for High-Density Seismic Surveys
Open Access
- 29 May 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (11) , 3768
Abstract
Large numbers of seismic channels and high-density energy-efficient acquisition systems are the development trend of seismic instruments and have attracted high R&D interests in recent years. The combination of remote sensing and wireless sensor network technology provides superior observation capabilities for high-density seismic exploration. However, large-scale and multi-node acquisition methods place higher requirements on time synchronization performance. Seismic data with poor time synchronization will cause considerable errors in the interpretation of seismic data and even have no practical significance. Thus, the strict time synchronization performance is the prerequisite and basis for the application of cable-less storage seismograph in high-density seismic array applications. The existing time synchronization methods have high power consumption and poor time synchronization accuracy, which is not suitable for the long-time task. In addition, these methods are affected by the number of nodes and the distance. This paper presents an energy-efficient time-sharing indexed interpolation intercept method for the seismic data synchronization. The time synchronization method uses the high-precision TCXO as the main clock and records GPS time in the SD card at intervals to achieve the high-precision time-stamp for the seismic data. Then the seismic data is intercepted intermittently based on precise time stamps, which achieves the strict seismic data synchronization. Performance analysis shows that the time synchronization accuracy of the proposed method is 0.6 μs and saves 73% energy of the time-sync periods compared to the common GPS timing method. The field measurement results indicate that the time synchronization accuracy is not associated with the working time and the distance between nodes so that the proposed synchronization method is suitable for the high-density seismic survey.Keywords
Funding Information
- The National Key R&D Program of China (2018YFC0603204, 10183201836, SXGJSF2017-5, 20160204068GX)
- National Natural Science Foundation of China (41204069)
This publication has 17 references indexed in Scilit:
- Assessing Short‐Term Clock Errors and Drifts of Temporary Seismic Networks Using the Active Airgun Source in Binchuan, YunnanSeismological Research Letters, 2019
- An Integrated Energy-Efficient Wireless Sensor Node for the Microtremor Survey MethodSensors, 2019
- Laboratory Tests of Three Z‐Land Fairfield Nodal 5‐Hz, Three‐Component SensorsSeismological Research Letters, 2018
- Evaluation of the southern California seismic velocity models through simulation of recorded eventsGeophysical Journal International, 2016
- A Low-Cost Energy-Efficient Cableless Geophone Unit for Passive Surface Wave SurveysSensors, 2015
- Separation of P–P and P–SV wavefields by high resolution parabolic Radon transformJournal of Applied Geophysics, 2015
- High-speed download of seismographs using private cloud technology and a proportional integral derivative controllerInstrumentation Science & Technology, 2015
- GFZ Wireless Seismic Array (GFZ-WISE), a Wireless Mesh Network of Seismic Sensors: New Perspectives for Seismic Noise Array Investigations and Site MonitoringSensors, 2010
- Practices and expectation of high-density seismic exploration technology in CNPCPetroleum Exploration and Development, 2009
- Time, clocks, and the ordering of events in a distributed systemCommunications of the ACM, 1978