A Simple Diagnosis Tool for Detecting Localized Roughness Features
Open Access
- 17 January 2025
- journal article
- Published by International Society for Concrete Pavements, Inc in Proceedings of the International Conference on Concrete Pavements
Abstract
The collection of distress data from video imaging of the pavement surface can provide the location and type of many distresses. However, it cannot provide useful information about some distress features such as the magnitude of faulting, breaks and curling in concrete pavements. This paper describes a simple tool to extract such information through the use of the raw profile data. Different methods were used in the study, including wavelets, time-frequency and discrete methods. The discrete elevation difference method (DED) was selected for faulting and breaks detection, and the discrete slope method (DS) was selected for curling detection. To test the validity of the analysis, surveys were conducted on different sites in Michigan. Faults magnitude was measured using Georgia faultmeter and the location of the distress is measured using measuring wheel. The profile data for the same pavement section where collected using the a high speed profilometer. The new tool was able to detect the magnitude of faulting and breaks with an average error of 0.1% and a standard deviation of 1%. The localization was also highly accurate (average error in distance is within 1 m or 0.5%). The results indicate that the methods described above can capture relevant information about these roughness features with reasonable accuracy.Keywords
This publication has 2 references indexed in Scilit:
- Application of Profile Data to Detect Localized RoughnessTransportation Research Record: Journal of the Transportation Research Board, 2002
- Construction of a High-Pass Digital Filter from a Low-Pass Digital FilterJournal of Applied Biomechanics, 1994