Sustainable lightweight mortar using biochar as sand replacement
- 10 December 2021
- journal article
- research article
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- Vol. 26 (16) , 8263-8279
Abstract
This study suggests a new application of biochar particles into the cementitious material as a sustainable solution to prevent depletion of virgin aggregates and increase of carbon footprint. Biochar from olive stone wastes (OSB) is suggested for production of lightweight mortar to replace 25%, 45% and 60% of coarse sand (%V) with biochar. Some experiments are planned to assess the viability of inclusion of coarser particles of biochar in the cement mortar and its effect on the density, water absorption, UPV, modulus of elasticity, thermal conductivity and compressive strength. The experimental results are discussed and the possible correlation between the properties is established. The results show that the replacement of coarse sand with OSB up to 60% does not compromise the performance of cement mortar. They imply the promising effect of biochar addition on reduction of dead load and improvement of thermal and sound insulation of the lightweight mortar.Keywords
This publication has 34 references indexed in Scilit:
- Physical and transfer properties of mortar containing coal bottom ash aggregates from Tefereyre (Niger)Construction and Building Materials, 2016
- Oil-palm by-products as lightweight aggregate in concrete mixture: a reviewJournal of Cleaner Production, 2016
- Effect of palm oil clinker (POC) aggregates on fresh and hardened properties of concreteConstruction and Building Materials, 2016
- New Types of Plastering Mortars Based on Marble Powder SlimeProcedia Technology, 2016
- Utilization of coal bottom ash to improve thermal insulation of construction materialJournal of Material Cycles and Waste Management, 2015
- Structural lightweight aggregate concrete using two types of waste from the palm oil industry as aggregateJournal of Cleaner Production, 2014
- Incorporation of fine concrete aggregates in mortarsConstruction and Building Materials, 2012
- The mechanical, transport and thermal properties of mortar and concrete containing waste corkCement and Concrete Composites, 2012
- Lightweight concrete made from crushed oil palm shell: Tensile strength and effect of initial curing on compressive strengthConstruction and Building Materials, 2012
- The influence of lightweight aggregate on the physico-mechanical properties of concrete exposed to freeze–thaw cyclesCold Regions Science and Technology, 2010