Synthesis and characterization of homogeneously sulfonated poly(ether ether ketone) membranes: Effect of casting solvent
Authors:
- 30 July 2008
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 110 (3) , 1763-1770
Abstract
Poly(ether ether ketone) (PEEK) was homogeneously sulfonated to have various degrees of sulfonation from 48 to 83%. The sulfonated PEEK (sPEEK) membranes were prepared by a solvent casting method using a few solvents such as N,N‐dimethyl formamide, N,N‐dimethyl acetamide, and 1‐methyl‐2‐pyrrolidinone. The effect of casting solvent on the membrane morphology and properties was investigated. The sulfonation degree and ion exchange capacity were determined by a back titration method, and the morphology of membrane by SEM. It has been demonstrated that the surface morphology and properties of sPEEK membranes, such as water uptake, methanol permeability, ion conductivity, and mechanical strength, were considerably affected by the type of solvent, where the DMAC‐sPEEK system showed the best performance in the polymer electrolyte membrane application for DMFC. This solvent effect on the membrane morphology and properties was caused by interaction strength (hydrogen bonding) between polymer and solvent. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008Keywords
This publication has 16 references indexed in Scilit:
- Methanol crossover in direct methanol fuel cells: a link between power and energy densityJournal of Power Sources, 2002
- New membranes for direct methanol fuel cellsJournal of Power Sources, 2002
- Sulfonated polyether ether ketone based composite polymer electrolyte membranesCatalysis Today, 2001
- On the development of proton conducting polymer membranes for hydrogen and methanol fuel cellsJournal of Membrane Science, 2001
- Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applicationsJournal of Membrane Science, 2000
- Electroosmotic drag in polymer electrolyte membranes: an electrophoretic NMR studySolid State Ionics, 1999
- Development and characterization of ion-exchange polymer blend membranesSeparation and Purification Technology, 1998
- Proton-conducting polymers derived from poly(ether-etherketone) and poly(4-phenoxybenzoyl-1,4-phenylene)Solid State Ionics, 1998
- The degree and effect of methanol crossover in the direct methanol fuel cellJournal of Power Sources, 1998
- A sulphonated poly(aryl ether ketone)British Polymer Journal, 1985