Interaction of cracks with grain boundaries in iron bicrystals
Open Access
- 29 December 2023
- journal article
- research article
- Published by National University of Science and Technology MISiS in Izvestiya. Ferrous Metallurgy
- Vol. 66 (6) , 718-724
Abstract
Molecular dynamic modelling of seed cracks evolution in iron bicrystals with inclined grain boundaries under uniaxial expansion was carried out. The process of seed crack evolution can be divided into four stages. At the first stage, in the interval of elastic deformations, the seed crack is stationary, and the stresses increase linearly, reaching a maximum value of ~7.0 GPa. At the same time, the atomic volume and stresses at the crack tip before its opening grow significantly faster than the average for the sample. At the second stage, the crack begins to spread into the grain volume. The process of crack propagation leads to an abrupt stress release due to relaxation processes in the areas adjacent to the crack banks and the emission of defects from the crack tip. After reaching the grain boundary, the crack stops and blunts. At the third stage, the crack remains in the grain boundary, and the sample stresses experience significant oscillations, which is caused by the emission of various defects both from the grain boundary and from other interfaces. The emission of defects from the crack tip can cause local migration of the grain boundary, which is formation of a bend on the initially flat surface of the grain boundary. When defects cease to be emitted from the crack tip, the voltage and atomic volume in this region increase rapidly. At the fourth stage, the crack begins to spread into the second grain. It was found that a boundary with a large grain misorientation angle is a more effective barrier restraining crack propagation. Initiation of the seed crack propagation in material is always preceded by an abrupt increase in atomic volume and stresses at the crack tip.Keywords
This publication has 23 references indexed in Scilit:
- Atomic mechanisms of local structural rearrangements in strained crystalline titanium grainTechnical Physics Letters, 2011
- Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization ToolModelling and Simulation in Materials Science and Engineering, 2009
- The brittle–ductile transition in single-crystal ironActa Materialia, 2008
- Atomistic simulation of dislocation nucleation barriers from cracktips in α-FeModelling and Simulation in Materials Science and Engineering, 2008
- Simulation of the interaction between Fe impurities and point defects in VPhysical Review B, 2007
- The grain boundary geometry for optimum resistance to growth of short fatigue cracks in high strength Al-alloysInternational Journal of Fatigue, 2005
- A crystallographic mechanism for fatigue crack propagation through grain boundariesActa Materialia, 2000
- The effect of thermal activation on dislocation processes at an atomistic crack tipJournal of Physics D: Applied Physics, 1995
- Simulation of nucleation and emission of dislocations by molecular-dynamics methodJournal of Applied Physics, 1995
- Short and long fatigue crack growth: A unified modelPhilosophical Magazine A, 1988