A low-voltage, low-power subthreshold CMOS voltage reference without resistors and high threshold voltage devices
Authors:
- 1 December 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 384-387
Abstract
A voltage reference of low supply voltage, low power consumption, no resistors and high threshold voltage devices has been proposed and simulated using 0.18μm technology in this paper. The range of supply voltage is from 0.9V to 3V with a maximum current consumption of 532.9nA and a line sensitivity of 6.7ppm/V. Temperature compensation is enhanced by taking body effect into consideration, and a temperature coefficient lower than 25ppm/°C is achieved in most cases. The power supply rejection ratio without any filtering capacitor is -45dB at 100Hz and -15dB at 10MHz.Keywords
This publication has 7 references indexed in Scilit:
- A Vt independent voltage reference based on composite transistors operating in weak inversion2011
- A 2.6 nW, 0.45 V Temperature-Compensated Subthreshold CMOS Voltage ReferenceIEEE Journal of Solid-State Circuits, 2010
- A 300 nW, 15 ppm/$^{\circ}$C, 20 ppm/V CMOS Voltage Reference Circuit Consisting of Subthreshold MOSFETsIEEE Journal of Solid-State Circuits, 2009
- A Sub-1-V, 10 ppm/ $^{\circ}$C, Nanopower Voltage Reference GeneratorIEEE Journal of Solid-State Circuits, 2007
- A Simple Subthreshold CMOS Voltage Reference Circuit With Channel- Length Modulation CompensationIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 2006
- A low-voltage low-power voltage reference based on subthreshold MOSFETsIEEE Journal of Solid-State Circuits, 2003
- Mutual compensation of mobility and threshold voltage temperature effects with applications in CMOS circuitsIEEE Transactions on Circuits and Systems I: Regular Papers, 2001