Hydrothermal effects on the thermomechanical properties of high performance epoxy/clay nanocomposites
- 28 December 2005
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 46 (2) , 215-221
Abstract
The effects of hydrothermal ageing on the thermomechanical properties of high performance epoxy and its nanocomposite were studied. The epoxy–clay nanocomposite was prepared through a recently developed “slurry‐compounding” approach. The cured samples were immersed in distilled water at 60°C for different periods of time before subjecting to characterization. The storage modulus, relaxation behavior, fracture toughness, and tensile properties were investigated. It was found that the storage modulus and α‐relaxation were strongly affected by water uptake, while the fracture toughness and Young's modulus were less influenced. Dependence of tensile strength and strain at break on water uptake was found to be different in neat epoxy and epoxy–clay systems. POLYM. ENG. SCI., 46:215–221, 2006. © 2005 Society of Plastics EngineersKeywords
This publication has 28 references indexed in Scilit:
- Fracture and toughening behavior of aramid fiber/epoxy compositesPolymer Composites, 2005
- Environmental effects on the mechanical properties of glass-fiber epoxy composite tubular specimensComposites Science and Technology, 2004
- Composites based on carbon fibers and liquid crystalline epoxy resins, 2 Dynamic-mechanical analysis and fracture toughness behaviorMacromolecular Chemistry and Physics, 2000
- Role of inherent matrix toughness on fracture of glass bead filled epoxiesPolymer, 2000
- Short glass fibre reinforcedpoly(butylene terephthalate) Part 1 –Microstructural characterisation and kinetics of moisture absorptionPlastics, Rubber and Composites: Macromolecular Engineering, 2000
- Polyamide coated Kevlar™ fabric in epoxy resin: mechanical properties and moisture absorption studiesComposites Part A: Applied Science and Manufacturing, 2000
- Role of particle cavitation in rubber-toughened epoxies: II. Inter-particle distancePolymer, 2000
- Crack bridging and fibre pull-out in polyethylene fibre reinforced epoxy resinsJournal of Materials Science, 1998
- Determination of the effect of seawater on the interfacial strength of an interlayer E-glass/graphite/epoxy composite by in situ observation of transverse cracking in an environmental SEMComposites Science and Technology, 1997
- Micromechanical aspects of fibre/crack interactions in an aramid/epoxy compositeComposites Science and Technology, 1997