Coagulation removal of nickel (II) ions by ferric chloride: Efficiency and mechanism
Authors:
- Оleg D. LinnikovОLОleg D. Linnikov
- Irina V. RodinaIRIrina V. Rodina
- Galina S. ZakharovaGZGalina S. Zakharova
- Konstantin N. MikhalevKMKonstantin N. Mikhalev
- Inna V. BaklanovaIBInna V. Baklanova
- Yulia V. KuznetsovaYKYulia V. Kuznetsova
- Alexander Yu. GermovAGAlexander Yu. Germov
- Alexander P. TyutyunnikATAlexander P. Tyutyunnik
- Zilara A. FattakhovaZFZilara A. Fattakhova
- 13 December 2022
- journal article
- research article
- Published by Wiley in Water Environment Research
- Vol. 94 (12) , e10827
Abstract
Removal of heavy metal ions, in particular, divalent nickel ions from natural and wastewater, is of great importance for the environment. Nickel (II) ions are very toxic and provoke many diseases. The purpose of this work was to study the possibility of removing toxic nickel (II) ions from polluted water using an iron (III) chloride (FeCl3) coagulant. It is shown that the removal of nickel ions from aqueous solution by iron (III) hydroxide precipitate formed during the coagulation process at pH 7 and 8 is described with satisfactory accuracy by the classical adsorption isotherms of Freundlich, Langmuir, and Dubinin‐Radushkevich. The studies performed with the use of X‐ray powder diffraction and thermal analyses, IR, Raman, and Mössbauer spectroscopy have shown that the uptake of nickel ions by iron (III) hydroxide precipitate is due to simple physical adsorption and is not accompanied by the formation of mixed iron and nickel compounds. No alloying of the formed iron (III) hydroxide precipitate with nickel ions takes place either. The formed iron (III) hydroxide precipitate is a two‐line ferrihydrite having the gross formula Fe2O3 × 3H2O. Its sorption capacity for nickel ions is almost an order of magnitude higher than that of some mineral and carbon sorbents, and at pH 7 and 8, it is 60.5 and 141.9 mg/g, respectively.Practitioner Points: Coagulant FeCl3 cleans contaminated solutions from Ni(II) ions. Iron (III) hydroxide precipitated at pH 7 and 8 is a two‐line ferrihydrite Fe2O3 × 3H2O. Removing of Ni(II) ions is described by classical adsorption isotherms. The most complete removal of Ni(II) ions occurs at pH = 8.Keywords
Funding Information
- Institute of Solid State Chemistry, Ural Branch, Russian Academy of Sciences (АААА‐А19‐119031890029‐7, АААА‐А19‐119031890025‐9)
This publication has 33 references indexed in Scilit:
- Mechanism of reduction in hydrogen atmosphere and thermal transformation of synthetic ferrihydrite nanoparticlesThermochimica Acta, 2015
- Removal of heavy metal ions from wastewaters: A reviewJournal of Environmental Management, 2011
- Removal of antimony (III) and antimony (V) from drinking water by ferric chloride coagulation: Competing ion effect and the mechanism analysisSeparation and Purification Technology, 2010
- Adsorption of Ni(II) on oxidized multi-walled carbon nanotubes: Effect of contact time, pH, foreign ions and PAAJournal of Hazardous Materials, 2009
- Raman spectroscopy of iron oxides and (oxy)hydroxides at low laser power and possible applications in environmental magnetic studiesGeophysical Journal International, 2009
- Enhanced Removal of Heavy Metals in Primary Treatment Using Coagulation and FlocculationWater Environment Research, 2008
- Genetic and Epigenetic Mechanisms in Metal Carcinogenesis and Cocarcinogenesis: Nickel, Arsenic, and ChromiumChemical Research in Toxicology, 2007
- Sorption isotherms: A review on physical bases, modeling and measurementApplied Geochemistry, 2007
- Thermodynamics of Pb2+ and Ni2+ adsorption onto natural bentonite from aqueous solutionsJournal of Colloid and Interface Science, 2005
- Sorption of cobalt(II) by amorphous ferric hydroxideColloids and Surfaces A: Physicochemical and Engineering Aspects, 1995