Eco-Efficient Cement-Based Materials Using Biomass Bottom Ash: A Review
Open Access
- 12 November 2020
- journal article
- review article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (22) , 8026
Abstract
In recent years the use of biomass for electricity generation in thermal and cogeneration plants has increased worldwide because it is an environmentally clean fuel whose impact measured in greenhouse gas emissions is practically zero. However, biomass bottom ash, a waste produced during combustion, has also increased considerably, which has both a negative economic and environmental impact, due to landfill transport and management of this by-product. Although biomass bottom ash has potential characteristics for application in the manufacture of construction materials, its full-scale application is difficult because of the wide range in physicochemical properties, depending on the type of biomass burned, such as wood residue, olive waste, waste paper sludge, cocoa shell, etc., and the type of combustion process in the plant. This study reviews the influence on the physicochemical properties, mechanical behavior, and durability of different cement-based materials, such as mortars, concrete, and cement-treated granular material, manufactured from biomass bottom ash. The previous studies demonstrate the feasibility of substituting natural materials for biomass bottom ash in cement-based materials, presenting adequate mechanical behavior and durability properties to comply with the required technical specifications in different building materials.Keywords
Funding Information
- Junta de Andalucía (valorización de cenizas de fondo de biomasa para aplicaciones de construcción sostenible - BIOCEM - ref. - 1264457-R)
This publication has 39 references indexed in Scilit:
- Physicochemical characterization and possible applications of the waste biomass ash from oleoresin industries of IndiaFuel, 2013
- Characterization of wastepaper sludge ash for its valorization as a component of hydraulic bindersApplied Clay Science, 2012
- Coal–biomass fly ashes for cement production of CEM II/A-V 42.5RConstruction and Building Materials, 2012
- Fly and bottom ashes from biomass combustion as cement replacing components in mortars production: Rheological behaviour of the pastes and materials compression strengthChemosphere, 2011
- Pyrolytic characteristics and kinetic studies of three kinds of red algaeBiomass and Bioenergy, 2011
- Potential contribution of biomass to the sustainable energy developmentEnergy Conversion and Management, 2009
- Physico-chemical characterisation of Indian biomass ashesFuel, 2008
- Durability of biomass fly ash concrete: Freezing and thawing and rapid chloride permeability testsFuel, 2008
- Biomass co-firing in a pressurized fluidized bed combustion (PFBC) combined cycle power plant: A techno-environmental assessment based on computational simulationsFuel Processing Technology, 2006
- A study of the application of residue from burned biomass in mortarsMaterials Research, 2004