An Experimental Investigation of Micropitting Using a Roller Disk Machine
Authors:
- 1 January 1995
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 38 (4) , 883-893
Abstract
Micropitting is a microscopic form of progressive fatigue wear. It is most often associated with case hardened gears although such failures have also been reported for rolling element bearings. This paper reviews the micropitting phenomenon and reports the results of an experimental study conducted using a roller disk machine. Analysis of the micropitted test specimens confirmed that the roller disk machine experiments faithfully reproduce the failure mode as found on full size gears. The effect of various operating parameters was investigated. The results show that increasing load, decreasing specific film thickness and maintaining negative relative sliding all increased the rate of micropitting wear. The authors also found that micropitting is almost completely eliminated at a very low, but non-zero, slide-to-roll ratio.Keywords
This publication has 12 references indexed in Scilit:
- An Analytical Life Prediction Model for the Crack Propagation Occurring in Contact Fatigue FailureTribology Transactions, 1992
- The Role of Near-Surface Inclusions in the Pitting of GearsA S L E Transactions, 1985
- Micropitting and asperity deformation1984
- An investigation of surface failure of surface-hardened gears by scanning electron microscopy observationsWear, 1983
- Observations of the Peeling Mode of Failure and Surface-Originated Flaking from a Ring-to-Ring Rolling Contact Fatigue Test Rig1982
- Some Factors Influencing the Pitting, Micro-Pitting (Frosted Areas) and Slow Speed Wear of Surface Hardened GearsJournal of Mechanical Design, 1981
- The inclination of cracking in the peeling failure of a ball bearing steel and its relation to the inclination of the principal residual stressWear, 1980
- A Numerical Solution of the Elastohydrodynamic Film Thickness in an Elliptical ContactJournal of Lubrication Technology, 1970
- The Role of Lubrication in Propagation of Contact Fatigue CracksJournal of Lubrication Technology, 1968
- Pitting Due to Rolling ContactJournal of Applied Mechanics, 1935