The impact of powder oxygen content on formability of 12CrNi2 alloy steel fabricated by laser melting deposition
- 10 May 2019
- journal article
- research article
- Published by SAGE Publications in Powder Metallurgy
- Vol. 62 (3) , 186-195
Abstract
Three various 12CrNi2 alloy steels were successfully fabricated on 35CrMo alloy steel by laser melting deposition with the aim of investigating the effect of powder oxygen content on formability of 12CrNi2 alloy steel. The phase constituents, macroscopic morphology, microstructure, and microhardness of powders and samples were studied by some modern analysis methods. The experimental results showed that with the increase of the oxygen content from 220 to 600 ppm, the sphericity and density of the powders gradually decreased which led to the appearance of pores in the as-deposited samples. The phase constituent of three as-deposited samples with different oxygen contents was α-Fe(M) phase. The percentage porosity in the macroscopic morphology increased with the increase of the oxygen content. Meanwhile, the high oxygen content contributed to more pores and the crack formation in the microstructure. With the increase of oxygen content, the microhardness of the as-deposited samples would decrease.Keywords
Funding Information
- National Key Research and Development Program of China (No. 2016YFB1100204)
- Key Research Project from Science and Technology Commission of Liaoning Province (No. 2017106036, 2018106004)
- Shenyang Science and Technology Funded Project (Nos. Z18-5-012, 18-014-4-36, 18-004-1-16, 18-201-0-02)
This publication has 59 references indexed in Scilit:
- A high strength low alloy steel fabricated by direct laser depositionVacuum, 2019
- Microstructure evolution and EBSD analysis of a graded steel fabricated by laser additive manufacturingVacuum, 2017
- Biomedical applications of additive manufacturing: Present and futureCurrent Opinion in Biomedical Engineering, 2017
- The role of lasers in additive manufacturing2017
- Metal Additive Manufacturing: A Review of Mechanical PropertiesAnnual Review of Materials Research, 2016
- The metallurgy and processing science of metal additive manufacturingInternational Materials Reviews, 2016
- An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnosticsAdditive Manufacturing, 2015
- Density and porosity control of sintered 316L stainless steel parts produced by additive manufacturingPowder Metallurgy, 2012
- Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stabilityMaterials Science and Engineering: A, 2009
- Selective laser melting of biocompatible metals for rapid manufacturing of medical partsRapid Prototyping Journal, 2007