High-Efficiency Hybrid Full-Bridge–Half-Bridge Converter With Shared ZVS Lagging Leg and Dual Outputs in Series
- 1 February 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 28 (2) , 849-861
Abstract
A novel soft-switching hybrid converter combining the phase-shift full-bridge (FB) and half-bridge (HB) LLC resonant converters' configuration with shared zero-voltage switching (ZVS) lagging leg is proposed to ensure the switches in the lagging leg operating at fully ZVS condition. The dual outputs of the proposed hybrid FB-HB converter are connected in series and the whole dc-output voltage can be regulated by the PWM phase-shift control within the desired voltage range. A resonant circuit is used in the secondary side of the FB converter to reset the primary current during the freewheeling period, as well as to transfer more input energy and clamp secondary rectifier voltage. The proposed converter is attractive for hybrid electric vehicle/electric vehicle on-board charger applications. The principle of operation, the validity, and performance are illustrated and verified on a 3.7-kW experimental circuit. Experimental results show that the proposed converter can get good efficiency curves at different operation points, and the maximum efficiency is 98.30%.Keywords
This publication has 35 references indexed in Scilit:
- Hybrid half- and full-bridge converter with high efficiency and full soft-switching range2011
- An Improved Full-Bridge Dual-Output DC–DC Converter Based on the Extended Complementary Pulsewidth Modulation ConceptIEEE Transactions on Power Electronics, 2011
- A high performance dual output dc-dc converter combined the phase shift full bridge and LLC resonant half bridge with the shared lagging leg2010
- A Fully Regulated Dual-Output DC–DC Converter With Special-Connected Two Transformers (SCTTs) Cell and Complementary Pulsewidth Modulation–PFM (CPWM-PFM)IEEE Transactions on Power Electronics, 2009
- Design and Implementation of an Accurately Regulated Multiple Output ZVS DC–DC ConverterIEEE Transactions on Power Electronics, 2007
- Dual-Bridge DC–DC Converter: A New Topology Characterized With No Deadtime OperationIEEE Transactions on Power Electronics, 2004
- Novel soft-switching DC-DC converter with full ZVS-range and reduced filter requirement. I. Regulated-output applicationsIEEE Transactions on Power Electronics, 2001
- High-efficiency and wide-bandwidth performance obtainable from a two-input buck converterIEEE Transactions on Power Electronics, 1998
- Zero-voltage and zero-current-switching full-bridge PWM converter using secondary active clampIEEE Transactions on Power Electronics, 1998
- Zero-voltage and zero-current-switching full bridge PWM converter for high-power applicationsIEEE Transactions on Power Electronics, 1996