Voltammetric detection of chlorite ion using carbon paste sensor modified withN-cetylpyridinium–bentonite

Authors:

Abstract
A voltammetric carbon paste sensor (CPS) was described for the detection of chlorite ion in water analysis. For the construction of the voltammetric CPS, organo-bentonites were synthesised by intercalation of N-cetylpyridinium (NCP) at different amounts into interlayer gap of bentonite. Some features of the obtained organo-bentonites such as structural, thermal and morphological were investigated by using various techniques. Afterwards, the voltammetric behaviour of the ClO2− solution was investigated with cyclic voltammetry in the potential range of 0.0–1.0 V at a scan rate of 50 mV s−1 based on the obtained organo-bentonites as electroactive material. The characterisation of the prepared organo-bentonites as electroactive material, the effect of the amount of NCP–bentonite (NCP–B) in modified CPS on the 10.0 mM ClO2− response was tested by chancing the percentage of NCP–B in the range of 2.50–12.50% under identical experimental conditions. The pH of the measurement cell was optimised by using 0.04 M Britton–Robinson buffer in the range of pH 2.0–12.0. Under the optimised conditions, developed sensor exhibited a linear response in the range of 2.0 × 10−5 to 2.0 × 10−4 M chlorite ions concentrations. The detection limit and the limit of quantification were figured out as 6.0 × 10−6 and 2.0 × 10−5 M, respectively. The repeatability and reproducibility of the sensor were calculated as 5.0% and 6.8% (N = 5), respectively. Finally, the sensor was successfully applied for the analysis of bottled water, and the mean recovery was found as 103 ± 3%.

This publication has 43 references indexed in Scilit: