Abstract
Immersion cooling is a promising thermal management strategy for lithium-ion battery, yet conventional single-layer designs suffer from a severe mismatch between coolant flow distribution and heat generation. This study proposes a novel three-layer physically zoned immersion cooling design. Horizontal partitions divide the module into three independent flow domains (upper tab zone, middle core zone, and lower bottom zone), enabling decoupled, demand-oriented coolant allocation. To comprehensively quantify intra module thermal consistency, three supplementary metrics are introduced: the standard deviations of cell maximum temperatures ("σ" _("T" _"max,mod" )), cell maximum temperature differences ("σ" _("Δ" "T" _"max,mod" )), and cell average temperatures ("σ" _("Δ" "T" _"avg,mod" )). Numerical results demonstrate that the three-layer design reduces "σ" _("T" _"max,mod" ), "σ" _("Δ" "T" _"max,mod" ), and "σ" _("Δ" "T" _"avg,mod" )by 24.6 %, 36.4 %, and 22.1 %, respectively, relative to the single-layer baseline. Further subdivision of the middle zone into four counter-flow sub-layers markedly suppresses stream wise coolant temperature rise, yielding additional reductions of approximately 60 % in "σ" _("T" _"max,mod" ) and 56 % in "σ" _("Δ" "T" _"avg,mod" ). Finally, a synergistic strategy combining outer thermal conductive aluminum plates (3.5 mm) and non-uniform channel widths (N-2-7-2 configuration) is implemented to mitigate edge-cell temperature disparities. The optimized configuration ultimately suppresses the "σ" _("T" _"max,mod" ), "σ" _("Δ" "T" _"max,mod" ), and "σ" _("Δ" "T" _"avg,mod" ) to 0.110, 0.342, and 0.202, respectively. These findings demonstrate that the proposed design achieves precise matching between coolant flow and heat dissipation demand, significantly enhancing thermal performance and temperature uniformity.

This publication has 23 references indexed in Scilit: