0.73–1.03-GHz Tunable Bandpass Filter With a Reconfigurable 2/3/4-Pole Response

Authors:

Abstract
This paper presents a tunable bandpass filter with a reconfigurable-pole response. 2-, 3-, and 4-pole states can be obtained based on employing series resonators with RF switches. The synthesis for the proposed filter is established, and the bandwidth for each pole state can be selected based on theory. The filter is built on a Duroid substrate with εr=10.2 and h=25 mil. The tuning for the center frequency is done using Schottky diodes, and the selection of the filter poles is achieved using RF microelectromechanical systems switches. A tuning of 0.73-1.03 GHz is achieved with a 1-dB fractional bandwidth of 3.9%-5.2%. The rejection levels at 200-MHz offset frequency of 2-, 3-, and 4-pole states are 28, 36, and 45 dB, respectively. This filter topology can find applications in reconfigurable radios with dynamic rejection levels.

This publication has 10 references indexed in Scilit: