Assessment of the Performance of a Modified USBR Type II Stilling Basin by a Validated CFD Model
- 1 November 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 147 (11) , 04021052
Abstract
The adaptation of existing dams is of paramount importance to face the challenge posed by climate change and new legal frameworks. Thus, it is crucial to optimize the design of stilling basins to reduce the hydraulic jump dimensions without jeopardizing the energy dissipation in the structure. A numerical model was developed to simulate a US Bureau of Reclamation Type II basin. The model was validated with a specifically designed physical model and then was used to simulate and test the performance of the basin after adding a second row of chute blocks. The results showed a reduction in the hydraulic jump dimensions in terms of the sequent depth ratio and the roller length, which were respectively 2.5% and 1.4% lower in the modified design. These results would allow an estimated increase of the discharge in the basin close to 10%. Furthermore, this new design had 1.2% higher efficiency. Consequently, the modifications proposed for the basin design suggest improved performance of the structure. The issue of the hydraulic jump length estimation also was discussed, and different approaches were introduced and compared. These methods follow a structured and systematic procedure and gave consistent results for the developed models.Keywords
This publication has 39 references indexed in Scilit:
- Ten iterative steps for model development and evaluation applied to Computational Fluid Dynamics for Environmental Fluid MechanicsEnvironmental Modelling & Software, 2012
- Scale effects in physical hydraulic engineering modelsJournal of Hydraulic Research, 2011
- Laboratory measurements and multi-block numerical simulations of the mean flow and turbulence in the non-aerated skimming flow region of steep stepped spillwaysEnvironmental Fluid Mechanics, 2010
- Numerical computation of the flow in hydraulic jump stilling basinsJournal of Hydraulic Research, 2008
- Similitude and scale effects of air entrainment in hydraulic jumpsJournal of Hydraulic Research, 2008
- Optical fibre probe measurements of bubbly flow in hydraulic jumpsInternational Journal of Multiphase Flow, 2005
- Experimental study of the air–water shear flow in a hydraulic jumpInternational Journal of Multiphase Flow, 2000
- Tetrahedral and hexahedral mesh adaptation for CFD problemsApplied Numerical Mathematics, 1998
- Classical hydraulic jump: length of rollerJournal of Hydraulic Research, 1990
- Classical hydraulic jump: sequent depthsJournal of Hydraulic Research, 1989