Ceramic and Composite Polishing Systems for Milled Lithium Disilicate Restorative Materials: A 2D and 3D Comparative In Vitro Study
Open Access
Abstract
Purpose: This study aims to evaluate the effectiveness of two ceramic and two composite polishing systems for a novel chairside computer-aided design/computer-aided manufacturing (CAD/CAM) lithium disilicate ceramic with three-dimensional and two-dimensional microscopy images. This ceramic material can be used for implant-supported or tooth-borne single-unit prostheses. Materials and Methods: Sixty flat samples of novel chairside CAD/CAM reinforced lithium disilicate ceramic (Amber Mill, Hass Bio) were divided into five groups (n = 15/group) and treated as follows: Group 1 (NoP), no polished treatment; group 2 (CeDi), polished with ceramic Dialite LD (Brasseler USA); group 3, (CeOp) polished with ceramic OptraFine (Ivoclar Vivadent); group 4, (CoDi) polished with composite DiaComp (Brasseler USA), and group 5 (CoAs), polished with composite Astropol (Ivoclar Vivadent). The polished ceramic surface topography was observed and measured with three-dimensional and two-dimensional images. Results: All polishing systems significantly reduced the surface roughness compared with the non-polished control group (Sa 1.15 μm). Group 2 (CeDi) provided the smoothest surface arithmetical mean eight with 0.32 μm, followed by group 3 (CeOp) with 0.34 μm. Group 5 (CoAs) with 0.52 μm provided the smoothest surface among the composite polishing kits. Group 4 (CoDi) with 0.66 μm provided the least smooth surface among all polishing systems tested. Conclusions: Despite the effectiveness of ceramic polishing systems being superior to composite polishing systems of the CAD/CAM lithium disilicate restorative material, both polishing systems significantly improved the smoothness.Keywords
This publication has 40 references indexed in Scilit:
- Digital Workflow for Virtually Designing and Milling Ceramic Lithium Disilicate Veneers: A Clinical ReportOperative Dentistry, 2015
- The effect of surface roughness on ceramics used in dentistry: A review of literatureEuropean Journal of Dentistry, 2014
- Ceramic dental biomaterials and CAD/CAM technology: State of the artJournal of Prosthodontic Research, 2014
- Effect of polishing systems on stain susceptibility and surface roughness of nanocomposite resin materialThe Journal of Prosthetic Dentistry, 2014
- Clinical results of lithium-disilicate crowns after up to 9 years of serviceClinical Oral Investigations, 2012
- Virtual-Designed and Computer-Milled Implant AbutmentsJournal of Oral and Maxillofacial Surgery, 2005
- Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramicsDental Materials, 2004
- Influence of hot pressing on the microstructure and fracture toughness of two pressable dental glass–ceramicsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2004
- Surface Roughness of Glass-Ceramic Insert-Composite Restorations: Assessing Several Polishing TechniquesThe Journal of the American Dental Association, 1996
- The influence of surface roughness and surface‐free energy on supra‐ and subgingival plaque formation in manJournal of Clinical Periodontology, 1995