Fracture mechanisms of spinodal alloys
- 30 August 2018
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 98 (33) , 3007-3033
Abstract
Fracture surface retains an of the entire deformation history undergone in a material. Hence, it is possible to derive the approximate deformation and fracture properties of a material from a systematic quantitative fractographic analysis when the microstructure is known. In this research, the deformation behaviour and fracture characteristics of a spinodal decomposed copper alloy at various ageing conditions have been investigated thoroughly. Systematic changes in microstructure are implemented in this alloy through the alteration of ageing time at an elevated temperature on different specimens. As a result, the wavelength and amplitude of modulated spinodal structures have been varied, while those of initial inclusion content, other second phase particles' volume/distribution, initial crystallographic texture and grain size were kept unaltered. Spinodal decomposition results from the coherency strains, hence the zone of mismatch of strain/stress between phases/interfaces acts as micro/nano void nucleation sites under tensile deformation. The two-dimensional tensile were correlated with the deformation and fracture properties of the alloy under constant strain rate at different ageing conditions at ambient environment. The results obtained bring fractographic information to the mechanical engineers and nuclear scientists investigating ductile fracture of spinodal decomposed alloys. This is a novel technique to characterise the material from an analysis of the fracture surface features.Keywords
This publication has 54 references indexed in Scilit:
- Martensite–Void InteractionScripta Materialia, 2013
- Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steelInternational Journal of Plasticity, 2009
- Geometry of dimples and its correlation with mechanical properties in austenitic stainless steelScripta Materialia, 2008
- Fracture-property correlation in copper-strengthened high-strength low-alloy steelScripta Materialia, 2008
- Martensite–ferrite interface strength in a low-carbon bainitic steelScripta Materialia, 2006
- An analysis of inclusion morphology effects on void nucleationModelling and Simulation in Materials Science and Engineering, 2002
- Ductile fracture surface morphology of amorphous metallic alloysCzechoslovak Journal of Physics, 2002
- Fatigue Crack Growth Behavior of Micro-Sized Specimens Prepared from an Electroless Plated Ni-P Amorphous Alloy Thin FilmMATERIALS TRANSACTIONS, 2001
- A modeling study of the effect of stress state on void linking during ductile fractureActa Materialia, 1996
- Applications of Spinodal AlloysAnnual Review of Materials Science, 1979